Cordless SDS Plus Rotary Hammer

August 15, 2013

Metabo HPT (formerly Hitachi Power Tools)

Fcp Hitachi Rotary Hammer Dh18 11116743

The SDS Plus Rotary Hammer (DH18DSLP4) is designed for optimal performance when drilling holes for the installation of concrete anchors or overhead drilling and features an 18-volt slide-type lithium ion battery pack

Two-step power switch with "power mode" for fast and efficient drilling in larger diameters and "save mode" for battery conservation and to avoid bending small diameter bits
An electro-pneumatic mechanism produces 1 ft.-lb. of impact energy
Drills up to 105 holes on one charge (1/4-in. x 1/4in.)
Features include slip clutch, idle strike restrictor, quick bit insert, side handle and depth gauge
Base-mounted LED light
Carbon brushes are externally accessible for quick and easy replacement and maintenance
Weighs 5.1 lbs.

Fill out the form below to request more information about Cordless SDS Plus Rotary Hammer

When paired with Milwaukee’s M18 REDLITHHIUM HIGH OUTPUT XC6.0 Battery, the cordless saw delivers up to 300 cuts per charge.

Milwaukee Tool Launches M18 FUEL 6.5-in. Circular Saw

When paired with Milwaukee’s M18 REDLITHHIUM HIGH OUTPUT XC6.0 Battery, the cordless saw delivers up to 300 cuts per charge.

The cordless narrow crown stapler kit can drive up to 700 narrow crown staples per charge.

Metabo HPT 18V MultiVolt 18-Ga 1.5-in. Narrow Crown Stapler Kit

The cordless narrow crown stapler kit can drive up to 700 narrow crown staples per charge.

The included HEPA Dust Extractor is OSHA Table 1 compliant for Exposure to Respirable Crystalline Silica (rule 1926.1153).

Makita Introduces D-handle Rotary Hammer with Dust Extraction

The included HEPA Dust Extractor is OSHA Table 1 compliant for Exposure to Respirable Crystalline Silica (rule 1926.1153).

Powered by a 2.0Ah 18V battery, the cordless nailer enables individuals to drive up to 700 brads per charge.

Metabo HPT Offers 18V MultiVolt 18-Ga Brad Nailer Kit

Powered by a 2.0Ah 18V battery, the cordless nailer enables individuals to drive up to 700 brads per charge.

Weighing 10 lbs. including reaction arm and battery, the BTW-Series is equipped with an integrated digital motor vectoring system delivering repeatable torque up to 6,000 ft. lbs.

Enerpac Offers BTW-series Battery Torque Wrench

Weighing 10 lbs. including reaction arm and battery, the BTW-Series is equipped with an integrated digital motor vectoring system delivering repeatable torque up to 6,000 ft. lbs.

The tool features a 2-1/4 peak hp brushless motor that handles router bits up to 2-1/2 in. in diameter and is equipped with a plunge lock lever, an adjustable three-position turret stop, a tool-free depth adjustment system and a spindle lock.

DEWALT Releases 20V MAX Cordless Plunge Router

The tool features a 2-1/4 peak hp brushless motor that handles router bits up to 2-1/2 in. in diameter and is equipped with a plunge lock lever, an adjustable three-position turret stop, a tool-free depth adjustment system and a spindle lock.

This tool serves as an application-specific carbide blade for wood containing nails, screws and other fasteners.

Diablo Tools Introduces AMPED Demo Demon Carbide Teeth Oscillating Multi-Tool Blade

This tool serves as an application-specific carbide blade for wood containing nails, screws and other fasteners.

The K 540i Power Cutter features an adjustable blade guard and cutting depth up to 4 in. (100 mm).

Husqvarna Battery-powered K 540i Power Cutter

The K 540i Power Cutter features an adjustable blade guard and cutting depth up to 4 in. (100 mm).

300 Dpi 1500px Dcn920 F1

DEWALT Introduces 20V Max XR Cordless 21º and 30º Framing Nailers

The next-gen nailers are compatible with optional extended magazines, DZN920 and DZN930 (sold separately), which are constructed from high-strength magnesium and hold two strips of nails.

The column system features integrated accessories that reduce material onsite and increase safety during assembly.

PERI Formwork Systems Introduces Alpha Column Formwork System

The column system features integrated accessories that reduce material onsite and increase safety during assembly.

The use of abrasion resistant steel in manufacturing of conveyor pulleys supports durability in demanding environments and handling bulk materials.

Superior Industries Upgrades Chevron Pulley

The use of abrasion resistant steel in manufacturing of conveyor pulleys supports durability in demanding environments and handling bulk materials.

Shortly after its origin, the Cary-Lift product line was acquired by Pettibone, and it remains a popular solution for pipe, pole, and log handling to this day.

Pettibone Celebrates 75th Anniversary of Cary-Lift

Pettibone announced that it is celebrating the 75th anniversary of the creation of the Cary-Lift.

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Makita Unveils 40V MAX XGT Battery-powered Backpack Vacuum

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

Multiquip Offers Battery-powered GloBug Lighting Solutions

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

Makita Offers 40V MAX XGT Shear Wrench

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

The new facility, focused on high complexity and high variation specialty fifth wheel manufacturing, will include the current SAF-HOLLAND Wylie, Texas operation.

SAF-HOLLAND to Build New Factory in Texas

The new Rowlett facility is the next phase of the SAF-HOLLAND manufacturing optimization and vertical integration strategy to increase capacity output that began with the opening of its Piedras Negras, Coahuila, Mexico plant in August 2023.

Skf Lincoln Gear Oil Dispensing Units

SKF Lincoln Unveils Mityvac Gear Oil Dispensing Units

The gear oil handling systems utilize compressed air for clean fluid handling.

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

DENIOS Launches BatterySafe Cases for Lithium-ion Batteries

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

2521 10 F

Milwaukee Introduces M12 FUEL Circular Saw

The Milwaukee M12 FUEL Circular Saw is designed for cross-cutting sheet goods and dimensional lumber.

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

Milwaukee Launches M12 Brushless Copper Tubing Cutter

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

The new products include the 20V MAX* Hydraulic Knockout Tool (DCE600), 20V MAX* XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX* XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

DEWALT Releases 20V MAX Knockout Tool and Bandsaws

The new products include the 20V MAX Hydraulic Knockout Tool (DCE600), 20V MAX XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

TennaCAM 2.0 Heavy Equipment is fully integrated with TennaCANbus, which allows it to deliver ECU data alongside video telematics.

Tenna Unveils TennaCAM 2.0 Heavy Equipment Camera

TennaCAM 2.0 Heavy Equipment is fully integrated with TennaCANbus, which allows it to deliver ECU data alongside video telematics.

Diablo made dura-carbide withstands up to 1,800°F of intense heat to combat rebar hits.

Diablo Tools AMPED Rebar Demon 4-cutter Hammer Drill Bit System

Diablo made dura-carbide withstands up to 1,800°F of intense heat to combat rebar hits.

Stand the Test of Time | JLG®

Stand the Test of Time | JLG®

Your work is meant to weather through some of the toughest conditions. Your equipment should do the same. That's why the best contractors trust JLG®.