Ambient Glow Technology - AGT

Speed-X Hammer Carbide

 

The Speed-X Hammer Carbide drills precise holes with its centric carbide tip, innovative inclined side cutters, shortened head design and enlarged dust-clearing channels. Vacuum optimized brazing and heat treatment of the precision carbide tip provides resistance to impact and thermal stresses. Speed-X alerts users when the carbide tip is worn. It is available in SDS-Max and splined versions in a variety of popular sizes.

 

Bosch Power Tools

75D Excavator

 

The new 75D mid-sized hydraulic excavator features a conventional boom and reduced tail swing. Designed for light residential, site development, underground and landscaping duties, the 75D weighs 17,637 lbs. and has a 15-ft. 1-in. dig depth. The unit also has a 54-net-hp diesel EPA Interim Tier IV certified engine/hydraulic management system.

 

John Deere Construction and Forestry Division

Stone Finish

 

Stone Finish is a ready-mixed floor coating system that provides a durable wear surface with the look and feel of natural stone. Formulated for durability and abrasion resistance, Stone Finish consists of aggregate in pure acrylic binder and can be spray or trowel applied. The seamless vapor formulation is VOC compliant. Stone Finish is low maintenance, features freeze/thaw resistance and can be used on both interior and exterior projects. Stone Finish is available in 30 colors.

 

Drytek Flooring Solutions

Spectra Precision 5.2XL Point and CrossLine Laser

 

The Spectra Precision 5.2XL Point and CrossLine Laser is an automatic self-leveling laser tool for a variety of construction applications. The laser combines a 5 beam laser pointer and a horizontal and vertical crossline laser. With the addition of the Spectra Precision HR250 Handheld Receiver the 5.2XL can be used for short-range exterior general leveling and alignment. The rugged protective rubber over-molding is designed to withstand drops of up to 3 ft. and is water and dust resistant as well.

 

Trimble Navigation Limited

1501 Articulated Wheel Dumper

 

Wacker Neuson's 1501 articulated wheel dumper features a compact size and swivel tipping bucket allowing it to reach and drop material in precise and confined areas. The 1501 has 3,307 lbs. of payload capacity and 1.05-cu.-yd. bucket capacity. Powered by a Yanmar 3-cylinder, 22.8-hp diesel engine, the unit also features a hydraulic twin-lock all wheel drive system.

 

Wacker Neuson Corporation

M-Crete

 

PolyMax M-Crete Flooring withstands extreme temperature changes and thermal shock. Available in a trowel smooth finish or with a slip resistant profile. The system features chemical resistance and is USDA accepted for federally inspected facilities and features quick installation. M-Crete also has virtually no odor and is available in decorative and slip resistant.

 

PolyMax

Rapid RH 4.0

 

The Rapid RH 4.0 combines Wagner Electronics' Smart Sensor and a redesigned Easy Reader with Touch-n-Sense technology for easy-to-use, fast and accurate RH testing. The Touch-n-Sense technology, Easy Reader and Smart Sensor allow the unit to turn on, take a reading and hold the data display for 5 minutes before powering off. The Rapid RH 4.0 has no re-calibration or re-certification issues.

 

Wagner Electronic Products, Inc.

Trowel-Top

 

Concrete Solutions' Trowel-Top is a polymer-modified micro-topping designed for troweling or squeegeeing over concrete and other surfaces. Trowel-Top can be integrally colored, stained or dyed and is used where a smooth finish is desired.

 

Concrete Solutions

Flat/Panel Clamp

 

The thin rubber coated jaws of the Flat/Plate Clamp allow it to be used in tight locations on virtually any material. A Web sling instead of a chain reduces weight, twist and injuries. The Spring tension jaw makes placement easy without resetting the clamp because it fell out of position. The clamp weighs only 13 lbs. and has a 1,760-lb. capacity.

 

 

EZ Grout Corp.