Floor Equipment for the Equipment Rental Business June 2009

Black Max floor machine

 

  • Matches the durability of roto-molded units with simple design of metal machines
  • Easy-to-use units

 

Powr-Flite

Boost

 

  • Boost (Battery Operated Orbital Scrubbing Technology) machine is a specially engineered hybrid merging Clarke scrubbing technology and high-speed orbital sanding technology
  • 50- to 70-percent reduction in water and chemicals, battery and labor savings, and a 40-percent increase in pad life, compared to traditional disc scrubbers

 

Alto Cleaning Systems, Inc.

BS-50 Stripper

 

Blastrac BS-50 Stripper

  • The Blastrac BS-50 compact, lightweight stripper removes coatings, adhesives and mastics, roofing materials, ceramic tile, wood, VCT, carpet and sheet vinyl. The BS-50 is easy to use, featuring a handle that detaches for transport so the unit can fit in smaller vehicles. Its light weight, so it can be handled by a single person. Adjustable rear wheels make finding the ideal blade angle quick and simple and its whisper-quiet operation allows it to be used on virtually any jobsite, including sensitive environments.

 

Blastrac

EDGEKutter 7120

 

  • Designed for polishing and preparing the edges of concrete, stone and wood surfaces
  • Rocker Pivot suspension maintains flat and even contact between the abrasive wheel and the surface
  • Spring-loaded Tension Throttle offers precise control of the grinder head
  • KR7 EDGEKutter dust shroud enables virtually dust-free operation with adequate vacuum system

 

Kut-Rite Manufacturing

FA-8 Floor Abrader

 

  • Floor abrader designed to micro-abrade factory-finished and site-installed floors
  • Alternative to traditional "pad and re-coat" or chemical process for abrading floors
  • Cylindrical-designed brushes allow machine to abrade with or against the pattern grain, ideal for parquet, herringbone, distressed and hand-scraped flooring
  • Tool-free quick-change brush design
  • Easy-to-dismantle, three-part body is simple to transport and store
  • 120V motor uses 8 amps during operation

 

Clarke

Floor Covering Scraper

 

  • Weighs 130 lbs.
  • Removes direct glue-down carpet, hardwood flooring, linoleum, non-slip floor coverings, vinyl tile and a variety of adhesives, cements and mastics
  • ¾-horsepower fan-cooled capacitor-start motor with thermal overload protection
  • Operating at 115V/10.3 amps under full load, scraper can be plugged into any regular 15-amp electrical circuit
  • 23-in. width makes it ideal for working in narrow, space-restricted areas
  • Comes complete with a built-in lifting handle as well as a blade change wrench, sharpening file, and 6- and 10-inch straight laser cut heat-treated blades

 

Multiquip Inc.

ProGrind Series

 

  • Include Flowmax dust extraction system
  • Patented Dual-Drive Technology
  • Designed for concrete floor preparation and repair, grinding and polishing of concrete floors and also terrazzo and natural stone

 

King Concepts

Saber Compact 20

 

  • Large solution and recovery tanks
  • Rugged machine construction
  • Ergonomic handle and simple controls
  • Wide-open accessibility and an overall reduced parts design
  • Available in brush/pad assist drive or traction drive

 

Windsor Industries

SG12/E

 

General Equipment's SG12/D signle-head surface grinder is powered by an enclosed, fan-cooled 1.5-hp electric motor. It's single rotating disc has a 12-in.-wide working width and a top disc rotation speed of 250 rpm.

 

General Equipment

SL8V2 Velcro Drum Sander

 

 

  • Requires no tools to attach sandpaper
  • Simplicity of paper installation allows renter to use extra-coarse sheets (such as 12 and 16 grit) with ease
  • User only has to insert the abrasives in the alignment slot and roll the paper on the drum
  • Hook and loop system saves counter people time and helps ensure a positive rental experience

 

Essex Silverline

Stow SFCS16

 

  • Floor covering scraper weighs 130 lbs.
  • Removes glue-down carpet, hardwood flooring, linoleum, non-slip floor coverings, vinyl tile and other adhesive, cement or mastic
  • .75-hp fan-cooled capacitor-start motor
  • 37 ft. of FGI-protected extension cord
  • Scre-type height control
  • Foldable handle

 

Multiquip Inc.

U-Sand Pro

 

  • Weighs 40 lbs. less than original U-Sand
  • Patented four-pad, random orbit design
  • Can be used as a sander, edger and buffer
  • Internal vacuum system allows for virtually dust-free environment

 

Cherryhill Mfg. Corp.

Loading