B01 Liquid-Gel Pigment
- Thixotropic gel specially formulated for integral coloring of concrete and mortar
- Water-based, solvent-free and environment friendly
- Designed to disperse throughout any concrete or mortar mix
- Highly resistant to sunlight and UV radiation, alkali and weather conditions
- Use in cast-in place concrete, precast, tilt-up, floors, countertops, retaining walls and more
Construcolor USA, Ltd.
Concrete Moisture Meter
- RH BluePeg sensor monitors moisture concentrations in center of slab
- Slips into sleeve embedded in concrete
- Takes readings until the moisture in the concrete has reached its final value
- Sensor can be reused
- Permissible moisture readings vary between 65% to 97%
Lignomat USA Ltd.
- Synthetic polymer floor polish
- Protects hardened concrete floors from harsh food products
- Imparts an immediate, high-gloss finish that requires no buffing
- Aids safety with additional slip resistance (ASTM D-2047)
Nox-Crete Product Group
- Designed for polishing and preparing the edges of concrete, stone and wood surfaces
- Rocker Pivot suspension maintains flat and even contact between the abrasive wheel and the surface
- Spring-loaded Tension Throttle offers precise control of the grinder head
- KR7 EDGEKutter dust shroud enables virtually dust-free operation with adequate vacuum system
FastFloor by Rhino Industrial
- A method for mechanically grinding, treating and polishing concrete floors
- Can transform new or old concrete floors into abrasion-resistant, dense, smooth and visually appealing surfaces
- Reduces the need for epoxy or thin film coatings
Husqvarna Construction Products
Lythic Solutions recently launched its Lythic Densifier, a colloidal silica-based densifier for the polished concrete industry. It can be spray applied in 15 minutes and eliminates scrubbing in, scrubbing off and disposal of the caustic gel created by silicates. Lythic Densifier is shipped as a concentrate and contains zero volatile organic compounds (VOC). Lythic Protector, a conditioner containing colloidal silica and polymers, and LythicCleaner, a cleansing formula that imparts additional silica into the concrete surface every time it is cleaned, are also available.
Lythic Solutions, Inc.
W.R. Meadows Perminator is an underslab vapor barrier that can withstand normal construction jobsite conditions and traffic. The Perminator is available in 10 and 15 mil thicknesses and comes in 200-ft. long rolls.
W.R. Meadows Inc.
CDCLarues new Pulse-Bac PB-2150 is a portable vacuum with an electronic sensor that detects when the collection tank is full. The vacuum also can collect and discard dust and debris simultaneously. The Pulse-Bac Technology stops the filters from becoming caked with dust and debris and prvents clogging during operation by internally flushing the filters. The vacuums conical-shaped filters can collect dust particles as small as .1 micron in size, produces 450 cfm with 70-in. of lift and weighs 200 lbs.
CDCLarue Industries Inc.
- Achieves higher floor levelness than hand straight edging
- Increases floor flatness
- Tightly controls elevation to design grade
- Exceeds FL 20 specs
The Allen Face Companies
Stego Wrap Vapor Barrier
Stegos Wrap Vapor Barrier is a 15-mil geo-membrane for moisture and radon gas resistance. It is made of a combination of prime virgin resins and additives and can be used in contact with and directly below a concrete slab. Stegos vapor barrier has an almost zero Water Vapor Transmission Rate and prevents moisture, water vapor, soil gases and alkaline salts from entering the building envelope.
Stego Industries, LLC
- High-strength, portland cement-based floor underlayment
- Compressive strengths up to 6,000 psi
- Formulated for use over concrete subfloors in commercial and institutional buildings
- Quick drying time
- Meets and exceeds ASTM F710
Hacker Industries Inc