Undercarriages & Tracks September 2008

Dura-Trax

 

The Dura-Trax polyurethane track pads and grouser shoes fit most OEM asphalt and concrete paving and milling equipment.

  • Enable equipment to travel over existing pavement without damaging it
  • Molded using premium, liquid-cast, thermoset polyurethane
  • Engineered for ease of installation
  • Designed to deliver greater traction and maneuverability and longer service life

 

C.U.E. Inc.

EverPads

 

The Everpads premium bolt-on track pads are specially designed for road repair equipment such as asphalt milling machines, pavers and excavators.

  • Anti-vibration and shock absorbing
  • Easy installation and replacement by simply bolting down to the grouser from behind
  • Provide better traction and a smoother ride



  • Bolt-on track pads
  • Maximum wear life, traction, shock absorption and steering
  • Designed for highway planers, pavers, excavators and trenchers
  • Also available: premium rebber Isolators for roller and plate compactors
  • Booth # C-4937

 

Evertire, Inc.

Grip-Lug Grouser Bars

 

The pre-formed Grip-Lug grouser bar closely matches the wear pattern of a crawlers worn track shoes, reducing installation time thanks to minimal trimming and welding requirements.

  • Suitable for extreme service applications
  • Special alloy steel matches or exceeds OE standards
  • Heat treated to preserve hardness and wear resistance
  • Restores drawbar pull
  • Requires less rod per inch of weld seam for reduced rebuild costs

 

Allied Construction Products

Mini-excavator and CTL Tracks

 

Solideal offers sizes of rubber tracks designed to fit most makes and models of mini-excavators and compact track loaders on the market today.

  • Specific guiding to ensure the correct fit the first time
  • Self-cleaning tread lugs for maximum traction
  • Patented Triple S system offers 50% less vibration than a standard system and reduced risk of detracking

 

Solideal Industrial Tire, Inc.

Model 200 Series Conversion System

 

The Model 200 series independent rubber track conversion system adds versatility to this aerial device based on a 4x4 Ford F-550 chassis.

  • All-seasons operation in all types of terrain and under poor travel conditions
  • 18-in.-wide rubber track provides added traction and low ground pressure

 

Mattracks

NextGen TDF Tracks

 

The NextGen TDF series heavy-duty rubber tracks are designed specifically for compact track loaders.

  • Crack and Cut Quarantine System contains small cracks and cuts to extend track service life
  • Proprietary rubber compound formula extends life by as much as 50%
  • SpoolRite Belting increases track tensile strength via a continuous belt system
  • Multiple lugs per pitch and a double offset tread pattern enhance ride while minimizing vibration

 

McLaren Industries, Inc.

Over the Tire Tracks

 

Grouser offers three different over-the-tire track styles featuring a patented open side plate that allows greater clean-out in the pivot area for field adjusting.

  • Large 1 1/4-in. hardened, replaceable wear bushings
  • Run loose design provides maximum performance through traction, flotation and cleaning
  • Bar Tracks feature an open bar design that utilizes the tire to provide maximum traction and flotation in soft, muddy and loose soil conditions
  • Combo Tracks (Hard Tracks and Soft Tracks) allow for either hard and aggressive or smooth and sensitive surface track

 

Grouser Products, Inc.

Poly bolt-on track pads

 

Poly Bolt-On Track Pads enable reuse of predrilled steel triple grousers by replacing only the removable polyurethane track pad.

  • Save 35% to 40% in replacement costs and up to 50% in labor costs
  • Bolt directly to the pre-drilled triple grouser
  • Install and remove easily
  • Fit all Roadtec and most other milling machines and asphalt pavers

 

BLS Enterprises, Inc.

Rubber Track

 

Aftermarket rubber tracks are available to replace the tracks on your compact equipment.

  • Optimize machine use by reducing ride vibration and decreasing machine wear
  • Non-metal core tracks available

 

DRB America

VTS Versatile Track System

 

The VTS Versatile Track System is a complete rubber track undercarriage that bolts directly to a skid steers standard hubs in under an hour.

  • Provides bi-directional suspension that adjusts independently from one side of the machine to the other
  • Suspension automatically applies the track undercarriages back to the ground to maximize track footprint, evenly distribute horsepower and improve machine stability on uneven terrain

 

Loegering Mfg. Co.

Loading