Sealers and Coatings August 2008

Advacoat ACC 75 Aliphatic Clear Coat

 

  • Polyaspartic polyurea concrete floor coating
  • One-day application - same day return to sevice
  • 75% solids
  • High-gloss, smooth finish
  • Abrasion-resistant
  • Can act as a topcoat for epoxy floors or a stand-alone floor coating
  • UV and weather resistant
  • Ideal for residential and light commercial applications

 

Advantage Chemical Coatings

Concrete Resurrection Stains and Sealers

Engrave-A-Crete now carries a complete line of decorative concrete stains and sealers from Concrete Resurrection. The line includes 34 colors of water-based pigmented stains and eight colors of reactive acid chemical (RAC) stains. The Concrete Resurrection line of interior and exterior sealers includes acrylics, epoxies and urethanes.

Engrave A Crete

Consolideck LS

 

Consolideck® LS (lithium silicate) from PROSOCO is a premium sealer, hardener and densifier for concrete floors. It applies in one coat without scrubbing or flushing, and treated floors are ready for grinding, polishing and traffic in about an hour. Floors resist damage from water, chemical attack and surface abrasion while Consolideck® LS reduces dusting, improves appearance and simplifies maintenance. Complies with all known national, state and district AIM VOC regulations and tested and certified to meet the nations highest indoor air quality standards.

 

PROSOCO, Inc.

Decra-Seal

Decra-seal is a non-yellowing, acrylic-based, high solids, liquid curing and sealing compound for the residential decorative concrete market. The clear, transparent sealer offers resistance to water, alkalis, mild acids and petroleum spirits. Decra-Seal is available in 1-gal. cans and 5-gal. pails. Decra-Seal W/B, a water-based version of the sealer, is also available.

W.R. Meadows Inc.

Lithium Densifier

 

  •   Penetrating, colorless and transparent protective treatment hardens the surface, yet it produces a breathable finish
  • Developed for use with colored ground and polished concrete and is also suitable for use on uncolored ground and polished concrete
  •   Produces a concrete surface that is nontoxic, easy to maintain and environmentally friendly after installation

 

L.M. Scofield

Multipurpose Sealer

 

  • Low-gloss protection on colored concrete, acid-stained floors and concrete overlays
  • Non-yellowing
  • Provides resistance to all stains, acids and efflorescence on indoor and outdoor surfaces
  • Protects against scuffing, heel marks and even tire marks

 

Glaze N Seal

Nox-Carb

Nox-Carb

  • Water-repellent, stain and sealer in one product
  • Beautifies and protects exterior vertical concrete and masonry surfaces
  • Silane chemistry penetrates into concretes micro-pores
  • Chemical bond defies dissolution
  • Nox-Crete

 

Nox-Crete Product Group

PowerCoat One Complete Kit

The PowerCoat One Epoxy from Vexcon Chemicals is a single component epoxy available in a convenient decorative floor kit. Choose from four unique color combination kits, each containing a gallon of color base coat epoxy, Vexcon blended DecoChips and a gallon of high-gloss, clear top coat epoxy, to seal and finish 250 sq. ft. PowerCoat One is resistant to staining, gasoline and hot-tire marking in addition to being a low odor, low VOC product.

Vexcon Chemicals Inc.

SB-7000 Concrete Sealer

The SB-7000 Concrete Sealer from Surebone protects colored, stained and exposed aggregate concrete from staining and resists acid, salt, other corrosives and weather while protecing against discoloration from damaging UV light. SB-7000 is water-based, single component and epoxy-modified. It can be used both indoor and outdoor on either new or existing concrete and on vertical and horizontal surfaces.

Surebond

Sta-Natural Sealer

Sta-Natural Sealer

  • Kemiko Concrete Products Sta-Natural Sealer is an alternative to solvent-based sealers for stained, stamped, or bare concrete and other cement and mortar surfaces.
  • Eco-friendly emulsion uses no solvents, emits little odor and cleans up with soap and water
  • Provides maximum protection against UV, alkaline and other types of damage
  • Ideal for driveways, walkways, facades, pool decks and cast or poured concrete
  • Repels water while allowing the substrate to breathe

 

Kemiko Concrete Stains

Super Poly

 

  • Two-component high-build, high gloss sealer for concrete floors
  • Can be coated to any thickness in a single application
  • Elongation of 300% which minimizes cracking due to cold joint and expansion contraction cycles
  • Can be applied in hot and cold weather conditions
  • 100% solids Aliphatic Poly-Urea system
  • Availabe in clear, gray and tan one- or five-gal. units

 

Clemons Concrete Coatings

ULTRA-GLOSS CRU

VSCs ULTRA-GLOSS CRU provides a high gloss, scratch resistance topcoat for many applications. The two-component aliphatic urethane is resistant to UV light exposure and wear and provides protection against stains and chemicals. ULTRA-GLOSS CRU can be used as a clear topcoat over existing coatings and stains or as a stand-alone coating over a VSC primer.

Vanberg Specialized Coatings

UltraCrete

Sherwin-Williams UltraCrete Coatings provide a textured, uniform finish to tilt-up construction, pre-cast panels or concrete block surfaces.

  • Formulated for spray application
  • Can be applied to damp concrete and in temperatures as low as 20 F
  • Delivers long-term resistance to UV damage and efflorescence

 

Sherwin-Williams Company

VOC 93 Clear Sealer

VOC 93 Clear Sealer from Super-Krete is a high gloss pure acrylic-epoxy sealer formulated to create an impervious protective shield over overlayments.

  • Resistant to tire marks, petroleum and most chemicals
  • Provides a tenacious, non-yellowing bond to virtually all types of surfaces
  • Safe alternative to high-level VOC solvent-based coatings

 

Super-Krete International

Xylexin

 

  • Concrete sealer coating
  • Available in matte or gloss finish
  • Stain resistant

 

Expressions LTD

Loading