Curbcat

August 17, 2008

Curbcat

  • Hydraulic vibrators and cylinders powered by skid-steer hydraulic system
  • Quick, easy hookup and disconnect
  • Molds changeable in minutes
  • Easily transported via pickup or trailer

Creative Equipment Design

Next product-->
<--Previous product




Share your experiences and thoughts of the Top Products with other concrete contractors by submitting comments (form below) on the various product pages. Visitors who leave comments will be selected from to receive a Kestrel Construction Weather Tracker from Nielsen-Kellerman.
Recommended
This sealer was over applied. It should have been applied 1 to 2 mils thick, but was likely 20 to 30 mils thick.
'Thin to Win' With Decorative Concrete Sealers
Thin applications are the simple answer to many acrylic sealer problems contractors face on decorative concrete projects like stamped and stained concrete.
June 26, 2013
Abrasives where abrasive material is sprayed onto a nylon pad are used for maintenance and light restoration.
Abrasives 101
Learn how to choose the correct abrasives for grinding and polishing concrete.
January 15, 2010
Brooks Bridge Construction Begins In Florida
Work Starts On New Design For Florida Bridge
Infrastructure contractor Superior Construction and WSP begin construction of Brooks Bridge, Florida, in $171 Million project.
November 9, 2023
Latest
Badger Curb Maker
Curb Roller Badger Curb Maker for Monolithic Pours
The Badger Curb Maker supports user efficiency and reduces the need for extra equipment, transportation and labor.
January 17, 2022
Gomaco Cc1200e
GOMACO Showcases Prototype CC-1200e Battery-powered Curb Machine
In development for almost two years, the CC-1200e battery-powered slipform curb machine is equipped with a power dense 48 VDC lithium-ion battery pack capable to slipform up to a 24-in. radius.
June 14, 2021
The CC-1200e Battery-Powered Curb Machine
The CC-1200e Battery-Powered Curb Machine
In development for almost two years, GOMACO Corp's CC-1200e battery-powered slipform curb machine is equipped with a power dense 48 VDC lithium-ion battery pack capable to slipform a 24-in. (610 mm) radius, depending on the mold profile.
June 9, 2021
Concrete Curb Custom Drum Designs for Unique Shape Requirements
Custom Drum Designs for Unique Curb & Gutter Shape Requirements
Improve efficiency, reduce labor and boost productivity by pairing with a Hydra-Screed 3000 to find a faster production time and a quality finish.
April 13, 2021
Collect Concrete Profits with a Curb Rolling Machine
Collect Concrete Profits with a Curb Rolling Machine
How implementing a walk-behind curbing machine can open doors and increase profits.
April 8, 2021
Functionality That Makes a Difference | JLG®
Sponsored
Functionality That Makes a Difference | JLG®
From Smart Load technology to self-leveling innovations, helping you and your crew return home safely is more than our job – it’s why we’re here.
April 25, 2024
Curb Roller Manufacturing offers the Curb Roller CM4000, a single-operator machine for shaping concrete for curb and gutter work. The CM4000 reduces the labor of shaping curb and gutter pours, allowing crews to complete work up to twice as fast as manual methods or face forming.
Curb Roller Manufacturing Reduces Curb and Gutter Labor with the Curb Roller CM4000
The Curb Roller CM4000 is a single-operator machine designed to cut the labor of shaping curb and gutter pours.
March 18, 2020
Screen Shot 2020 02 05 At 3 29 48 Pm
[VIDEO] Curb Roller CM4000 Speeds Up Curb and Gutter Creation
Curb Roller's CM4000 hydraulically driven curb and gutter machine features two-way variable speed control, adjustable guide ring for uniform curbs and 30 different available profiles.
February 5, 2020
Screen Shot 2020 02 05 At 3 30 11 Pm
[VIDEO] Curb Roller’s Batt Screed for the Small Concrete Contractor
Designed with the smaller contractor in mind, Curb Roller’s battery-powered roller screed uses the DeWalt Flex Volt battery making servicing or replacing the battery simple through any DeWalt dealer.
February 5, 2020
LPI added Topcon Positioning Systems' Millimeter GPS Paving System to its Power Curber 5700-C in 2018.
Florida Curb and Gutter Firm Solves Labor Issues with Stringless Solution
For Lenard Powell Inc., the move to Topcon's Millimeter GPS Paving System has resulted in a better product, improved production rates and a smaller workforce.
December 26, 2019
Power Curber 5700 D 1
5700-D Curb Machine
The 5700-D slipform curb machine, which replaces the 5700-C, features the Power Curber SlipSmart Control System that comes ready to interface with Topcon, Leica, and Trimble 3-D/Stringless systems
November 7, 2019
Stand the Test of Time | JLG®
Sponsored
Stand the Test of Time | JLG®
Your work is meant to weather through some of the toughest conditions. Your equipment should do the same. That's why the best contractors trust JLG®.
April 25, 2024
6 7% Cross Slope
Power Curber 7700 Slipform Paver
The Power Curber 7700 is a multipurpose slipform machine designed for a wide variety of offset applications and paving up to 20 ft. wide
February 27, 2017
Miller Formless and Guntert & Zimmerman Form Strategic Alliance
The two companies will share industry knowledge, establish a common dealer network and market each others' products and services
October 10, 2016
Autopilot is a Wirtgen proprietary system that uses GNSS along with a base station for steering and offers several options for grade control: robotic total station, ultrasonic sensor, laser and GNSS. The instruments needed for this system are typically less expensive up front and for daily use.
3D Technology Simplifies Concrete Paving Operations
The absence of stringline allows easier access on paving projects.
May 15, 2015
Video: ConTech’s iTerra Electronic Control System Revolutionizes Phoenix Curber Machine
Video: ConTech’s iTerra Electronic Control System Revolutionizes Phoenix Curber Machine
Phoenix Curber's iTerra control system provides ease of use and setup for cross-slope and grade configuration, with no separate control boxes required
February 6, 2015
Phoenix iTerra 9 54caa69896b02
iTerra Controller for Curb and Gutter Machines
Controller is designed for mid-sized curb and gutter machines
January 29, 2015
There was six miles of curbs throughout the development that TACC carved out and fine graded them with 3/4-inch stone as prep for the asphalt paver and placed the concrete curb and gutter using its Power Curber 5700-C with Topcon Millimeter GPS machine control.
GPS Machine Control Curbs Costs on Huge Residential Subdivision
Contractor uses Topcon Millimeter GPS machine control on its Power Curber 5700-C curb and gutter machine, eliminating stringlines and saving time, labor and concrete waste
August 4, 2014
Dsc09118 11458153
Form-Botic Curb and Sidewalk Machine
May 13, 2014
Fcp Curb Fox 2000 10938081
Curb Fox 2000
September 19, 2013
The corner curbwork was done quickly and with less formwork than would have been possible with a large curb machine.
Phoenix Curb Machine with Topcon System Installs Challenging Parking Lot Curb
Midsize curb machine and automated grade control allow contractor to tackle a tough curb project featuring deep placement, tight radii
March 11, 2013
1660628632 10874490
Video: Phoenix Curbers Curbie Curb Cutting Machine
Ed Taylor, vice president of product development for Phoenix Curbers, talks about the changes the company made to a curb cutting saw to adapt it for more cutting applications
February 6, 2013
Curb Pro3 10831297
Curb-Pro
November 19, 2012
Functionality That Makes a Difference | JLG®
Sponsored
Functionality That Makes a Difference | JLG®
From Smart Load technology to self-leveling innovations, helping you and your crew return home safely is more than our job – it’s why we’re here.
April 25, 2024