BC462EB Soil Compactor
The 51,000-lb. BC462EB combines the features of Bomags single-drum rollers with design features from its refuse compactors to produce a product well suited to push, spread and compact soil on medium to large-scale dirt projects.
- Incorporates four-wheel hydrostatic drive and a 255-hp water-cooled Deutz water-cooled diesel engine
- Sealed frame design keeps materials from entering frame or engine compartment, while protecting drivetrain components
- Scraper bar system keeps wheels free of dirt
- Travel speed provides high productivity
The 51,000-lb. BC462EB combines features of the companys single-drum rollers with design features from its refuse compactors to produce a product well suited to push, spread and compact soil on medium to large-scale dirt projects. Four-wheel hydrostatic drive and a 255-hp Deutz water-cooled diesel engine ensure optimal power, gradeability and traction. A sealed frame design keeps materials from entering the frame or engine compartment, while providing complete protection to drivetrain components. A scraper bar system keeps the wheels free of dirt to maintain a high level of compaction performance.
Bomag
EarthPro Series DD-2024
The EarthPro Series DD-2024 compact horizontal directional drill is powered by an 83-hp Cummins B3.3C turbocharged diesel engine, which enables it to deliver 20,000 lbs. of thrust/pullback force with up to 2,400 ft.-lbs. of rotary torque. The floating carriage has two speeds, including a 120-fpm fast mode. An onboard mud pump provides flows of 15 gpm at 1,250 psi. Features include a quad rack-and-pinion drive with adjustable force limiter, independent rear stabilizers and a dual stake-down system. The patented Es!Lok system is integrated into the drill controls for added safety, plus there is an additional strike alert system with voltage sensor.
Astec Underground
Loadrite X-Weigh 2350
The LOADRITE X-Weigh 2350 onboard weighing system for excavators ensures all trucks are loaded to their full legal capacity.
- Uses Multi-Dimensional Compensation weighing technology
- Accurate to within +/- 3%
- Multiple sensors track angle and position of the boom and stick, as well as changes to hydraulic pressure
- Two tilt sensors enable weight calculations to remain accurate even on sloping or uneven ground
- Alarm alerts operator once the load reaches the trucks legal limit
The LOADRITE X-Weigh 2350 features Multi-Dimensional Compensation weighing technology that is accurate to +/- 3% and enables weighing of materials while the excavator is in operation. The angle and position of the boom and stick, as well as changes to hydraulic pressure, are monitored by sensors mounted on the pivot points of the arm. Readings are transferred to an onboard software package, and the weight of each bucket is displayed via the easy-to-use graphic interface. As sequential readings are added up in the system, an alarm alerts the operator once the load has reached the trucks legal limit.
Actronic Technologies/Loadrite
Model 240B SRA Combo Drill System
The Model 240B SRA combo drill system combines the standard features of the Model 210B SRA with the capability of converting to a pneumatic core drill with a few simple tools on the jobsite.
- Totally pneumatic core drill utilizes a three-speed motor and requires a minimum of 77 cfm, while the rock drill configuration requires 100 cfm
- Can core and drill holes from 5/8 to 2.5 in. in diameter and drill up to 18 in. deep
- Compact frame design allows operation in a 4-ft. patch while drilling to within 6 in. of a corner, and is adjustable to drill into the center of a concrete slab from 6 to 24 in. thick
The Model 240B SRA "combo" drill system combines the standard features of the Model 210B SRA with the capability of converting to a pneumatic core drill with just a few simple tools while on the jobsite. The totally pneumatic core drill utilizes a three-speed motor and requires a minimum of 77 cfm for operation; the standard rock drill configuration requires 100 cfm. The unit can core and drill holes from 5/8 to 2 1/2 in. in diameter and drill up to 18 in. deep. Its compact frame design allows it to operate in a 4-ft. patch, while drilling to within 6 in. of a corner. It is also adjustable to drill into the center of a concrete slab from 6 to 24 in. thick.
RG 1645 Stump Cutter
The RG 1645 self-propelled stump cutter combines a 44-hp Kubota turbo-diesel engine, four-wheel-drive and a 59-in. cutting width into a compact machine that can fit through a 36-in. gate. Its low center of gravity and unique pivot design keep the engines weight low to the frame for added stability, delivering more horsepower to the stump. Fold-down chip retainers maximize chip capacity and minimize cleanup time. The unit incorporates joystick controls, a hydraulic backfill blade, Command Cut and two-speed ground travel.
Rayco
Screening Buckets
Screening buckets are available for mini-excavators and small skid steers up to large excavators and wheel loaders. Effective even with difficult and wet materials, the units offer volumes ranging from .15 to 4 cu. yds. and weights between 300 and 5,300 lbs. The screen separates fine and coarse material, without crushing larger particles, at capacities up to 300 cu. yds. per hour. Rotating discs/blades and cleaning scrapers also allow use for waste handling.
Screening buckets are available for mini-excavators and small skid steers up to large excavators and wheel loaders.
- Screen separates fine and coarse material without crushing larger particles
- Volumes range from .15 to 4 cu. yds. and weights between 300 and 5,300 lbs.
- Screening capacities up to 300 cu. yds. per hour
- Effective with difficult and wet materials
- Rotating discs/blades and cleaning scrapers allow use for waste handling
REMU USA Inc.
Site Spreader
This second-generation, dual auger cement spreader is capable of dustless loading and spreading. Spreading rates are double the previous design, exceeding 90 lbs. per sq. yd. at 2 mph. A power matching pump delivers improved efficiency, while the power shifting drive system ensures the product wont bind in the hopper. The CAN-based control package provides a choice of speed matching discharge or manual spreading. A patent-pending slide gate seals the hopper as it is pneumatically filled. The double-reverse expanded flow air circulation system drops most of the dust before it exists the hopper via a pulse jet baghouse.
Stoltz, division of Stoltzfus Spreaders
StoutKart SK500
- BackSaver Hydraulic Power Unit lets you get hydraulic power where you need it with a no-lift loading system
- Use as a one-person tool
- Will operate any hydraulic tool
- Pressure range of 500-2,000 lbs.
- Flow of 1-9.8 gpm
The SK500 BackSaver hydraulic power unit delivers 1.0 to 9.2 gpm with pressure control from 500 to 2,000 psi, enabling it to power hydraulic tools of all kinds for heavy-duty use and commercial applications. Flow and pressure can be matched to the requirements of each tool. The Backsaver Kart with no-lift loading system maximizes portability and minimizes the personnel required. The unit can be used while attached to the rear bumper hitch of a vehicle or an ATV/UTV, or while standing alone. Power is provided by a 12.5-hp Briggs & Stratton electric start engine.
UT5212 POWERPLATFORM
The UT5212 POWERPLATFORM multipurpose vehicle features a quick-change rear platform that can be ordered with a 12-yd. hydraulic dump box or can be easily upfitted with spreaders, dumpers, sprayers, etc. The optional front and rear three-point hitch, PTO and tongue hitch further expand its versatility. A mid-mounted 260-hp Cummins QSB Tier III engine is mated to a six-speed forward/three-speed reverse smooth-shifting ZF powershift transmission, allowing for a a top speed up to 45 mph with optional gearing. Other features include a full-time four-wheel drive system, three-mode steering system and 110-cu.-ft. cab with adjustable air suspension seat and Automatic Temperature Control system.
V-Series Compact Wheel Loaders
The 6,750-lb. V3-6 and 7,651-lb. V4-6 loaders deliver lift capacities of 5,760 and 7,451 lbs. Their quiet, fuel-efficient Yanmar three-cylinder, water-cooled diesel engines generate 30.3 and 40.4 hp, enabling maximum travel speeds up to 11.8 mph. A fully automatic drive mode provides smooth acceleration and gear changes with no operator input. A fixed speed mode keeps the units in low gear regardless of the position of the accelerator pedal. Rear-axle oscillation reduces operator fatigue and ensures operator control of the equipment when working on irregular surfaces. Single-lever bucket operation and a column-shifted lever with safety lock for forward and reverse movement facilitate ease of use. An optional mechanical quick-coupler fits most skid-steer attachments.
Yanmar America Corp.
