Spotlight: Repair December 2007

W.R. Meadows Inc.

10 Minute Concrete Mender

• Penetrates deeply into concrete, making repairs from the inside out
• Two-part polyurethane has a surface tension 1/3 of water and may be needle injected into concrete cracks as small as one millimeter
• Polyurethane drives itself into concrete surfaces and bonds concrete back together in 10 minutes at 70º F
• Needle tip mixers available in three sizes from 0.8 to 1.6mm and can be used on polished floors, decorative concrete, and retail showrooms or anyplace where aggressive cutting and preparation is not desired

Roadware, Inc.

Grab-n-Tote

• Concrete slab remover makes it easier for one person to safely lift and move up to a 500-lb. concrete slab
• Dolly-like tool attaches to concrete slabs 4 to 12 in. thick by 18 to 48 in. in length
• Uses a metal claw and curf blade to hook under slab and lift it
• Universal claw-grabbing action allows operator to grasp carpeted, tiled and even rough surfaced concrete slabs out of a trench or off a flat floor
• Able to negotiate sharp turns and confined spaces while carrying slab

GMJ Company LLC

Concrete Repair Products

• 100% acrylic products
• Concrete sealer resists blushing when exposed to rainfall or moisture
• Concrete crack sealant designed for sealing cracks and joints
• Concrete patch is a heavy bodied trowel grade patch to fill cracks up to 1 in. wide

SealMaster

Sakrete Top N' Bond Concrete Patcher

• Made from sand and cement
• Add water for resurfacing and patching work
• Polymer-modified
• Layers may be applied from featheredge up to 1/2-in.or brushed on

Bonsal American

SP8/G Series II

• Surface planer suitable for a range of applications including milling misaligned sidewalks and joints, removing thermo and cold plastic markings and prepping floors for new coatings
• Can be equipped with various 5-hp industrial-quality gasoline engines
• Unitized, welded steel plate frame
• Maximum cutting depth of 5/8 in. with a cutting width of 8 in. and a 31/4-in. cutting proximity to a vertical wall
• Screw-type, positive-locking depth selector
• Water-mist dust control fitting
• 3-in. vacuum connection for further dust control

General Equipment

Multi-Gang Slab-Rider Drills

• Pneumaticthree-gang Model 210-3 SRA, four-gang Model 210-4 SRA and five-gang Model 210-5 SRA
• Compact frame design allows drills to operate in a 4-ft. patch while drilling to within 6 in. of a corner
• Bits drill to a standard 18-in. depth orcan be adjusted to drill into the center of a 24-in. slab
• Adjustable drill spacing from 12 to 36 in.
• Tri-steering feature enables rotation within the drill's own radius
• Auto-alignment features allow for quick repositioning after each hole set
• Include a roller bearing feed system and individual regulator to set optimum drilling speed for each drill

E-Z Drill, Inc.

Ultraflow Underlayment

• Line of four Ultraflow Brand Floor Underlayments offers high compressive strengths and versatility
• Ultraflow G-1.0 designed for use in residential and light commercial applications, with a compressive strength of 3,500 to 4,200 psi at 10 to 14 days
• Ultraflow 2.0 designed for fast application and setting and is ready to handle light construction traffic 24 hours after being poured
• Ultraflow 3.0 designed for leveling or topping rough and spalled concrete and will accept floor coverings after 24 hours
• Ultraflow 4.0 designed to act as a final floor surface or high-performance underlayment, allowing the return of light traffic within 24 hours

USG Corporation