Truckbed Tools

Makita HR4041C
The HR4041C 1 9/16-in. spline shank rotary hammer has a 12-amp motor producing up to 460 rpms for drilling into 5,000-psi concrete.

  • "Hammering only" or "rotation with hammering" dual-purpose function
  • "No hammering while idling" feature helps increase tool life
  • Torque-limiting clutch
  • Electronic variable speed control dial
  • Accepts spline shank bits for rotary hammering and 3/4-in. hex to 21/32-in. round for demo hammering

Chicago Pneumatic CP 0017 SVR
The vibration-reduced CP 0017 SVR chipping hammers feature a strong steel spring vibration isolator assembly that limits vibration levels to just 2.7 m/s2.

  • 20.5-lb. CP 0017SVR 3R has a .68-in. round shank, and the 21-lb. CP 0017 SVR 3H has a .58-in. hex shank
  • Standard D-type ergonomic trigger handle
  • Screw cap tool retainer
  • Require 36 cfm of air and produce up to 1,900 bpm
  • Deliver a 3-in. tool stroke during operation

DeWalt Corded SDS Hammers
This line of heavy-duty 1-in. SDS hammers includes single-mode and three-mode pistol grip and D-handle models, plus three-mode L-shape hammers with or without quick-change chuck.

  • Up to?2.5 ft.-lbs. of impact energy at a rate of 4,300 bpm
  • Improved hammer mechanisms ensure?maximum power and performance
  • Increased rating of 7.5 to 8 amps
  • Steel depth rod and steel clutch

Hilti TE 7-A Rotary Hammer Drill
The cordless TE 7-A offers a 5/16- to 3/4-in.-diameter optimum drilling range, suitable for drilling and light chiseling in concrete and masonry.

  • 36-volt lithium-ion batteries backed by Cordless Power Care
  • Can be charged up to 50% capacity in 18 minutes or 100% capacity in 36 minutes
  • Professional chiseling function
  • Optional TE DRS-M dust removal system
  • CPC batteries and chargers an be activated under the Hilti Theft Protection System

Metabo SBE610 Hammer Drill
The 4.5-lb. SBE610 has a 610-watt motor that enables it to generate a 6,200-bpm maximum impact rate.

  • Rated at 5 amps with 5 Nm of torque and a no-load speed of 3,100 rpm
  • Maximum drilling diameter of 1/2 in. in concrete, 3/8 in. in steel and 3/4 in. in soft wood
  • Rubberized handle and compact construction for fatigue-free, comfortable operation
  • Exhaust routing circulates dust and debris downward and toward the front of the tool, away from the motor and user

Milwaukee Electric V28 SDS Rotary Hammer
The 9.6-lb. 0756-22 V28 cordless 1-in. SDS rotary hammer is powered by V28 Lithium-Ion technology for consistent fade-free power and greater run time.

  • Rotary hammer, drill only and chipping operating modes
  • Compact L-shape design with non-slip grip handle
  • 28-volt, reversible motor delivers 4,700 bpm and 2.1 ft.-lbs. of impact energy
  • 1-in. solid bit drilling capacity in concrete and an optimal concrete drilling range of 3/16 to 3/4 in.

CS Unitec SDS-Max Hammer Drill
The SDS-Max hammer drill has a 2-in. bit capacity and can drill concrete and masonry.

  • Hammer drilling, hammering and rotation operating modes
  • Operates at 1.6 hp at 90 psi while consuming 53 cfm
  • Operates at up to 250 rpm with up to 2,500 bpm
  • Safety clutch protects against overloading and jamming
  • Quick-change chuck and pivoting side handle
  • Weighs just 26 lbs. and measures 19.5" x 9.8" x 4.5"

Bosch 1-in. SDS-plus Bulldog Xtreme
The 1-in. SDS-plus Bulldog Xtreme rotary hammers are available in both D-handle and pistol-grip designs.

  • 7.2-amp motor
  • Vital components "dialed in" with tight tolerances to remain concentric, smoothly transfer energy and last longer
  • Deliver 2.2 ft.-lbs. of hitting force at up to 5,800 bpm
  • Up to 1,300-rpm drilling speed
  • Feature a rotating brush plate, rotating cord turret, SDS-plus tool holder, integral clutch and three-mode selector

Hitachi DH30PC2 Rotary Hammer
The compact 1 3/16-in. SDS plus rotary hammer weighs 9.5 lbs. and measures 14 in. in length, yet produces an impact energy of 4 ft.-lbs.

  • Electronic variable speed control provides a no-load RPM between zero and 850, and an impact rate of zero to 3,700 bpm
  • Operating modes include drilling only, hammer only and hammer drilling
  • Chuck accepts SDS Plus bits by sliding the bit into the retainer
  • Adjustable 360° side handle
  • 7.4-amp motor delivers 850 watts of input power

Loading