New Rental Products October 2007

MacKissic SC262-18VERL
Merry Commerial by MacKissic's SC262-VERL Chip N Shred machine with its heavy-gauge, commercial construction, is highway towable with independent, Flexride suspension, 4-in. rapid-feed chipping as well as a shredding chamber with 48 free-swinging hammers. The SC262-18VERL Chip N Shred is powered by a 18-hp twin-cylinder Vanguard engine which features a rotor engagement system with load-free starting and overload protection as well as electric start. Reduces waste by as much as 20 to 1.

Compact Power Boxer 427
The Boxer 427 mini-skid features 9" x 42" rubber tracks for optimum traction and flotation with only 3.7 psi of ground pressure. Unit features a 900-lb. operating capacity and weighs roughly 2,450 lbs. (with operator) with a compact footprint of 44" x 70". Powered by a 27-hp Kohler Command Pro 27 gas engine, the Boxer 427 features a two-pump, 3,000-psi hydraulic operating system that develops 12.6 gpm of hydraulic flow to run the auxiliary and propulsion systems. Standard quick-attach system enables quick, easy switch-out of over 50 universal compact utility attachments.

Hilti Self-Sharpening Chisels
The 1 1/8-in. Hilti hex connection polygon chisels will help make your customers more productive than ever. Designed for use in both demolition hammers and stand-up breakers, the 1 1/8-in. hex connection chisels join the Hilti family of self-sharpening chisels. Made with a unique polygon design, these durable chisels stay sharper to provide a more positive rental experience. Hilti polygon chisels also increase the working length of flat and wide-flat chisels by 100 percent, allowing for deeper penetration. The unique design also helps prevent the chisel from jamming in the base material.

Forkster Multi-Tool System from Kaltec
The Forkster Multi-Tool System fits all mini skid steers and offers quick and easy tool change. It features one adapter plate with countless applications and includes a trencher, garden rake, garden fork, wheel barrow, hitch and spade.

New cab option for Mustang track loaders
Mustang has upgraded its air conditioning/heater system to create an optional pressurized can for each of its three current compact track loader models -- MTL16, MTL20 and MTL25. Mustang track loader cabs equipped with this option now have pressurization similar to modern, upscale agricultural tractor cabs, virtually eliminating entry of dust, dirt and debris. Noise is also kept at a minimum. The Generation II Air Conditioning/Heater included in the cab option is comprised of updated interior ducting, featuring six new adjustable louvers allowing the operator to control the amount and direction of the air flow. New dual, outside air intakes, working in conjunction with inside recirculation filters, minimize the dust and dirt. To maintain optimum visibility in cold weather, there's a special defroster vent located near the front cab door.

Bandit 1890XP
Bandit now offers its 18-in. capacity hydraulic-feed drum-style Model 1890XP brush chipper as a single-axle unit with a 180-hp engine. This engine was previously only available on the Model 1890HD (heavy-duty), whose dual axles and heavier frame often put the machine over the mandatory 10,000-lb. weight restrictions for local infrastructure. The Model 1890XP with 180-hp engine, nicknamed "The Brute," offers the same 18-in. chipper capacity on a single 12,000-lb. axle. Fully loaded, the unit weighs approximately 9,600 lbs. and is 94 in. wide. Like all Bandit hydraulic-feed drum chippes, the 1890XP also features the patented "power slot," which is cut into the belly of the chipper. This allows for proper flow of air through the discharge and provides a slot for chips that might remain in the housing to escape, making the chipper virtually impossible to plug.