Material Handling Equipment

1195160832815 10297590

Bobcat V638 VersaHandler TTC

  • 18,275-lb. V638 VersaHandler telescopic tool carrier features a three-stage boom with a maximum lift height of 38 ft. 11 in.
  • 6,700-lb. maximum load capacity
  • 26-ft. 11-in. maximum forward reach
  • Side-mounted engine
  • Hydrostatic transmission with inching pedal and dynamic braking system
  • Rigid unitized frame
  • Optional field-installed stabilizer kit

Mustang Radio Remote Control for Telehandlers

  • Virtually eliminates the need for a helping hand on telehandler applications
  • Allows telehandler boom to be raised and lowered, extended and retracted, all from remote control pendant
  • Operators can also start up or shut down machine from remote
  • Available on Mustang telehandler models 742, 944 and 1155

Lull Model 1044 C Series II

  • 80 in. of horizontal boom travel for accurate load placement.
  • 10,000-lb. maximum lift capacity with a 54-ft. maximum lift height
  • 115-hp John Deere diesel engine
  • Modulated powershift transmission with four-speed forward and three-speed reverse

SkyTrak Model 8042

  • 6,000-lb. capacity at its 41-ft. 11-in. maximum lift height
  • 1,800-lb. capacity at 26-ft. 7-in. maximum reach
  • Auxiliary hydraulics for attachment use
  • Stabil-TRAK rear axle stability system
  • +/- 10 degree frame leveling
  • Four-wheel drive and steer

Gradall Model 544D10-55

  • 10,000-lb. maximum lift capacity and a 5,000-lb. capacity at its 55-ft. maximum lift height
  • 90 degree rear-pivot steering
  • Forks and load are kept inside tight turning radius at all times, creating excellent maneuverability

JLG Personnel Work Platform

  • For use with most JLG, Gradall, Lulland SkyTrak telehandlers
  • 32-sq. ft. platform with a 1,000-lb. capacity
  • Rapid installation with secure locking
  • Swing entry gate with sturdy steel mesh flooring
  • Eight lanyard attachment points
  • Compliant with the requirements of ANSI/ITSDF B56.6-2005

Terex GTH-844

  • Smooth joystick controls
  • Handles various attachments
  • 8,000-lb. maximum lift capacity
  • Maximum lift height of 44 ft.
  • 27-ft. maximum reach
  • 99-hp John Deere diesel engine

Manitou MT 6642

  • 6,600-lb. lift capacity
  • 42-ft. lift height
  • 28-ft. 3-in. maximum forward reach
  • 99- or 115-hp John Deere engine
  • Three-speed power shift transmission
  • Four-wheel drive
  • Frame leveling

Haulotte Top Lift

  • Six models with up to 4-ton lifting capacities and lift heights to 55 ft. 9 in.
  • Quick couplers for various attachments
  • Ergonomically designed, ROPS/FOPS cabs offer continuous 360 degree visibility via more glass and a higher cabin height
  • Features include a driver safety system, ergonomic seat with armrests and complete dashboard

MTA Distributors Contractor Lift from Sumner

  • 18-ft. lifting height
  • 650-lb. capacity
  • Rolls through standard doorway and tailgates
  • Reversible forks
  • Lockable 5-in. polyurethane casters

Gehl RS5-19

  • 11-ft. turning radius
  • Boom reach of 19 ft. 1 in.
  • 5,000-lb. lift capacity
  • 360 degree view from standard ROPS/FOPS canopy
  • Two direct mechanical joystick controls for boom and fork tilt
  • 64-hp turbocharged, water-cooled Deutz diesel engine

New Holland M Series

  • Operating weights from 21,781 lbs. to 25,353 lbs. and lift capacities from 3,500 to 5,000 lbs.
  • Maximum lift heights from 42 to 45 ft. with 29- to 31-ft. maximum forward reach
  • Low-profile, low-boom design
  • Turning radii of 153 in.
  • Three steering modes
  • 95- (M427) and 120-gross-hp (M428 and M459) IVECO engines

MEC TH60/TH80

  • The TH60 and TH80 offer 6,000- and 8,000-lb. lift capacities with lift heights to 41.5 ft.
  • Three-stage, four-plate, robotically welded boom
  • Adapter plate allows use of skid-steer attachments
  • Load-sensing, fully powered orbitol steering with three steer modes
  • 100-hp Deutz diesel engine

Ingersoll Rand VR-530C

  • 100-hp Perkins turbocharged engine
  • Hydrostatic transmission
  • Low and high all-wheel drive modes
  • Travel speeds from zero to 15.4 mph
  • Steering modes include two-wheel, four-wheel and crab
  • 30-ft. maximum lift height
  • 21-ft. maximum forward reach

Genie Superlift Contractor

  • Can be operated by one person
  • Lifts, lowers and moves loads with the aid of six interchangeable accessories: standard forks, adjustable forks, boom, load platform, pipe cradle and fork extensions
  • SLC-12 can lift 650 lbs. up to 12 ft. 11 in.; SLC-18 lifts 650 lbs. to 18 ft. 6 in.; SLC-24 can handle up to 650 lbs. to 24 ft.
Latest