SonoBlaster Intrusion Alarm
The SonoBlaster dual alert work zone intrusion alarm from Transpo warns road crews and drivers simultaneously to help prevent crashes and injuries in work zones.
- Mounts to barricades, cones, drums, delineators, A-frames and other barriers
- Upon impact by an errant vehicle, horn instantly blasts 125 decibels for 15 seconds to signal that the work zone has been violated
CEAttachments Severe-Duty Edge Cold Planer
The Edge severe-duty cold planer is suited for use on high-flow skid steers.
- Available in 40-inch width and 10-inch depths
- Electro-hydraulic-controlled tilt, depth and sideshift
- Planetary reduction gearbox and fitted seals prevent milled debris from eroding the seal
- In-line filter
- Full side plates and rear mounting flange enclose drum
- Front lid for easy access for cleaning and maintenance of picks
Case 921E Wheel Loader
The upgraded 921E is now equipped with a 297-net-hp six-cylinder, Tier III electronically controlled engine.
- Choice of three power curves and four work modes
- Cab includes tilt steering and infinitely adjustable seat, arm rests and control placement
- Redesigned bucket offers a 5.75-cubic-yard capacity
- Easy access to fluid-level sight gauges and centralized grease fittings
- All service checks made from ground level
ALLU SM Screener Crusher Attachment
The ALLU SM screener crusher attachment can be used with skid steers, wheel loaders or excavators.
- Reclaims and recycles most asphalt types
- Can process RAP on-site to increase RAP usage
- Can also be used to load materials
- Screening sizes from 1" minus to 5" minus
Eager Beaver Paver PT Series Trailers
The Paver PT Series is designed to safely load rollers, pavers and milling machines.
- Low front approach
- Tapered ramps and gradual slope
- Low load angle
Pine SuperPave AFG2 Gyratory Compactor
Pine's AFG2 is a third generation gyratory compactor which incorporates the newest technology that laboratory technicians need in a gyratory compactor.
- Built-in angle measurement capabilities
- Designed to account for frame compliance and dynamically compensates for varying mix stiffness
- Internally stores results from 20 previous tests, including gyration number, specimen height, angle of gyration, consolidation pressure and sheer per gyration (optional)
Titan V-Floor Asphalt Trailer
Titan Trailers offers an "extreme-duty" version of its THINWALL
aluminum live-floor trailer, designed to handle the high heat of hot mix.
- "V-Plow" cleaning system works with V-Floor to clean between the V-shaped steel slats after the load is walked off
- 48-foot five-axle model
- Remote control to run the unloader from the paver
- Can unload 40 tons in 10 minutes
- Strong but light extruded aluminum sidewalls and coupler plate
Pine SuperPave AFG2 Gyratory Compactor
Pine's AFG2 is a third generation gyratory compactor which incorporates the newest technology that laboratory technicians need in a gyratory compactor.
- Built-in angle measurement capabilities
- Designed to account for frame compliance and dynamically compensates for varying mix stiffness
- Internally stores results from 20 previous tests, including gyration number, specimen height, angle of gyration, consolidation pressure and sheer per gyration (optional)
Humboldt Testing Equipment
Humboldt Mfg. provides asphalt-specific testing equipment.
- Marshall compactors
- SHRP equipment and binder analysis equipment
- Testing equipment for soil, concrete, asphalt, geotechnical, aggregate sieves and splitters
- General lab equipment
- ASTM and AASHTO testing apparatus
Kenco Compaction Wheel
Kenco compaction wheels feature a unique design that mixes the soil as it compacts.
- High-strength steel spoked rims
- Self-cleaning capabilities
- Available for all trench sizes from 4 to 60 inches
- Quick-connect models available
- Removable mount with pins and a soil leveling plate
- Standard sheepsfoot style with hex pad and wedge pad wheels available
American Compaction Diamond Compaction Wheels
The Diamond Compaction Wheels are designed for use on backhoes, excavators, skid steers and compact excavators.
- Over 30 models with sizes from 4 to 72 inches
- Each wheel equipped with cutting edge and choice of mounting plates
- "Triple" Seal Bearing with rock protectors
BID2WIN 2007
The BID2WIN 2007 enterprise-level heavy construction management software application includes a new version of the Microsoft.NET framework.
- Comparison cost method allows users to detail out self-performed costs and compare them to subcontractor price quotes
- Cost groups feature offers the ability to group like items and tasks and utilize similar cost structures for all of them
- Enables RFQ groups to be split among multiple subcontractors or vendors
- Upgraded tree view in subcontractor and vendor management allows users to simultaneously view all items, tasks or materials for a single subcontractor or vendor
Terex TXL300-2 Wheel Loader
The TXL300-2 weighs in at 38,140 pounds and is powered by a Doosan DL08 227-hp, 1,700-rpm engine.
- Standard load-sensing steering system with a flow amplifier and a priority valve
- Powershift transmission can be used in manual or automatic modes
- Bucket capacity of 3.9 cubic yards
- Breakout force rates at 36,416 pounds
- Straight tipping load capacity of 29,549 pounds; articulated tipping capacity of 24,471 pounds
- Wheelbase of 10 feet 6 inches with a ground clearance of 1 foot 7 inches
- Planetary hub reductions on front and rear axles
