Edge Pro Countertop Edging Machine
- Portable edging system that produces perfectly straight or curved edges
- Powered by a standard variable speed router requiring 110 volt electricity
- 10,000 rpm
- Uses industry standard diamond router bits
5-in. Rat Tail Grinder
- Two new models of small angle grinders: basic 1812 and advanced 1824E
- Both offer optimal balance and control, durability, and vibration-dampening technology
- 1824E offers Bosch Electronic Kickback Protection that monitors tool for rapid slow down in rpm then shuts tool off; mechanical clutches; Restart Protection, which prevents unexpected grinder activation and prevents grinders from skating across the floor
- 1812 features 9.5 amp AC/DC compatible motor and weighs 5.2 lbs.; 1824E features 12-amp motor and weighs 5.3 lbs.
HT-S4C Power Trowel
- 4-cycle power trowel designed for decorative concrete overlays
- Quiet, low-emissions 31cc Honda engine
- Weighs 45 lbs.
- Fingertip pitch and speed controls
- Telescoping handle
Rock 'N' Roller
- Roller, weight and spray release system for stamped concrete
- Seven patterns available
- 24-in., 36-in. and border rollers available
- Lightweight
- Up to five times faster than traditional
- methods
Cleform Tool Company
7-in. Grinder-Vac
- Shrouded concrete grinder system designed to control dust, reduce clean-up time, provide better visibility and increase productivity
- Connects to a variety of Blastrac dust collection units
- Utilizes a heavy-duty, high rpm grinder motor with a tough yet flexible polyurethane dust shroud
Blastrac
USA Pro Grade Power Mixers
- For use in paint, coatings, tile, masonry, concrete and related applications
- For batches up to 25 gal. and 400-plus lbs.
- Seven models, including heavy-duty single- and double-paddle mixers
Super Sprayer
- 2-gal.-capacity compression sprayer
- Ideal for spraying concrete stains, form release agents and degreasers
- Metal-free
- Features a comfort-grip shutoff, poly pump, chemical-resistant hose, angled wand, and lightweight, translucent tank
H. D. Hudson Mfg. Co.
Mongoose Pro Pack
- Includes Mongoose 411 concrete engraver, blades, training materials, layout kit, storage case and more
- Cuts, scores and saws straight lines for tile patterns and other long-line designs
- Center pivot allows for cutting circles
- Vacuum point allows for dust-free cutting
Vibra-Beam Countertop System
- Can be attached to any standard saw horse creating a high quality vibration table
- Achieve a tight, dense and void-free finish in the shop or on the job
- Portable, lightweight and small
- Available in either 115-volt power or pneumatic air
18Volt LXT Lithium-ion Impact Driver
- Lithium-ion cordless impact driver kit, model BTD142HW
- Weighs 2.8 lbs.
- Four-pole motor design
- 3,200 impacts per minute
- Fully recharges in 15 minutes
TEQ-Grind Hand Grinders
- Designed to run cool and hold up under extended use in high-productivity environments
- Variable speed control enables operators to cut or grind a wide range of materials from hard to soft
- TG5V features 750-watt, variable-speed motor and is ideal for a wide array of applications and accessories
- TG6V features professional-grade 1,200-watt, 12-amp, variable-speed motor; pistol grip; and 6 in. capacity with a 5-in. DXT turbo diamond blade
AWP-158 Polishing Tool
- Designed for polishing, shaping, core drilling and light grinding
- 7.8 amp, 800-watt
- 3,000 rpm
- Side handle and "C" handle included
- Flat polishing caster for improved stability
- Center water-feed and water supply with garden hose attachment
5-in. Angle Grinder
- Model WE14-125 VS 5-in. angle grinder works for grinding, cutting and polishing
- Powered by a 12-amp motor
- Disc speed variable from 3,000 to 10,500 rpm
- Quick wheel change system enables rapid toolless changes
END 712 P "Mini" Diamond Drill
- Ideal for drilling dowel, anchor and thru holes in concrete, tile and natural stone
- 0 to 8000 rpm variable speed
- Water-cooled diamond bits drill 5/32-in.- to 3/4-in.-diameter holes
- 6.3-amp motor
- Weighs 5 lbs.
- Features include a built-in water swivel with hose connection and valve, a keyless chuck and depth gauge
- Use for gravestones, countertops, plumbing and other masonry needs