Concrete Paving February 2009

Gomaco Corporation

PC400 and PC600

The PC400 and PC600 slipform pavers are designed to pour within 2 ft. of an object and back out over what was just poured.

• Patented floating finisher allows pouring of material within 6 in. of a previously poured curb section that is 90° to the current pour
• Will pour over rebar, perform trench pours and below-grade pours and are tolerant of most mixes
• Unilateral lifting of the mold and hopper controls the height of the curb
• Rotary actuators for front steering provide 180° of movement

The PC400 and PC600 slipform pavers are designed to pour within 2 ft. of an object and back out over what was just poured. Unilateral lifting of the mold and hopper controls the height of the curb. A patented floating finisher allows pouring of material within 6 in. of a previously poured curb section that is 90° to the current pour. Rotary actuators for front steering provide 180° of movement. Auto rear steering allows precise tight turns and reversing down the stringline.

Curb Appeal International, Inc.

Pervious Concrete Head

The Pervious Concrete Head is a 12-ft. head attachment for the SXP (eXtreme Platform) Laser Screed.

• Specifically designed for the placing and finishing demands of pervious concrete
• Efficiently produces "green" parking lots, driveways and similar projects when coupled with the SXPs Trimble laser control system
• Three-stage boom and rotating and offset head capabilities enable maximum versatility and productivity

The 12-ft. Pervious Concrete Head for the SXP Laser Screed brings laser-controlled accuracy to pervious concrete placement and finishing. The attachment is specifically designed for the placing and finishing demands associated with pervious concrete. It efficiently produces "green" parking lots, driveways and similar projects when coupled with the SXPs Trimble laser control system. Three-stage boom and rotating and offset head capabilities enable maximum versatility and productivity.

Somero Enterprises

PL 500 Planers

The three-wheel-drive PL500T and four-wheel-drive PL500TD are highly maneuverable, hydraulically powered compact planers for asphalt and concrete pavement applications.

• 6.3- (160mm) and 7.88-in. (200mm) maximum cutting depths with a 19.7-in. (500mm) working width
• 110- and 130-hp Cummins four-cylinder, water-cooled diesel engines
• PL500T incorporates a mechanically driven cutting drum, anti spin control system and quick-release rear-loading system

The three-wheel-drive PL500T and four-wheel-drive PL500TD are highly maneuverable, hydraulically powered compact planers for asphalt and concrete pavement applications. The units offer 6.3- (160mm) and 7.88-in. (200mm) maximum cutting depths with a 19.7-in. (500mm) working width. Power is supplied by 110- and 130-hp Cummins four-cylinder, water-cooled diesel engines. The PL500T incorporates a mechanically driven cutting drum, anti spin control system and quick-release rear-loading system.

Dynapac USA, Inc.

PM-200

The 64,386-lb. PM-200 half-lane milling machine performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

• 83-in. cutting width
• 12-in. cutting depth
• Caterpillar C18 Tier III-compliant engine with ACERT Technology
• Caterpillar wet clutch rotor system
• Front conveyor discharge

The 64,386-lb. PM-200 half-lane milling machine performs controlled full-depth removal of asphalt and concrete pavements in a single pass. It features an 83-in. cutting width and a 12-in. cutting depth. Power is supplied by a 575-hp Caterpillar C18 Tier III-compliant engine with ACERT Technology. The electronically controlled load-sensing system matches propel speed to load on the engine for maximum production. Features include a Caterpillar wet clutch rotor drive, four steering modes, a folding front-loading conveyor and optional automatic grade and slope controls.

Caterpillar Inc.

Power Curber 5700-C

The 5700-C compact slipform paving machine handles concrete curb-and-gutter, barrier, sidewalk and special applications.