CONEXPO-CON/AGG will have plenty of new construction equipment and technology on display for the rental industry. Here’s what you’ll see at the show:

• 125,000 construction industry professionals
• More than 2,000 exhibits
• 2.2 million net square feet of exhibit space
• 120 education sessions, certification programs and conferences

Here’s a look at some of the products you’ll be able to see on the exhibit floor. For more information, just circle the inquiry number on the reader service card included in this issue.

Coneqtec AP Cold Planers

• High-torque, direct-drive motors
• Fastest cutting drum head available (no remilling)
• Chews up the road into chunks, not powder
• Skid steer weight placed directly on drum
• 12- to 48-in. width sizes available
• Booth #G-180

Bobcat T320 Compact Track Loader

• 92-hp diesel engine
• Vertical lift path loader
• 3,200-lb. rated operating capacity
• 18-in. wide rubber tracks produce low ground disturbance, reduce ground pressure and provide extra traction
• 10-ft. 9-in. lift height
• Equipped with hydraulic system that produces 21.2 gpm
• Permanently lubricated idlers and rollers
• Features include fully adjustable suspension seat and state-of-the-art instrument panels
• Booth # G-100

Weber CR 3 Hd & CR 3 Diesel

• Lower hand/arm vibrations, reduced noise level through protection covers, and adjustable handle bar
• Optimized air intake system with cyclone filter to protect engine against dust and premature wear
• Equipped with the compaction control system from Weber MT (COMPATROL)
• Operating weight of 448 to 522 lbs.; operating width of 20 or 24 in. with extension plates
• Honda GX 270 (gasoline 9 hp) or Hatz 1 B 20 (diesel 4.6 hp)
• Working speed up to 66 fpm
• Booth #629

Leading Attachments Ripper Bucket

• Allows the excavator operator to rip through rock, pry stumps or dig V trenches
• Saves digging time, backfill time and backfill material
• Powerful like a single-pointed ripper, but allows operator to scoop
• Supplied with one powerful MTG KingMet tooth
• Available for any excavator above 6,000 lbs.
• Booth # N-1100

The Equipment Lock Co. Skidsteer Lock

• Locks both drive controls of all skid-steer loaders
• Available with barrel-style key
• Order multiple units keyed alike
• Also available with built-in changeable combination lock; set your own four-digit code
• Durable baked-on powder coat finish
• Booth # C-4645

Sage Oil 11126 Lube Trailer

• Patented vacuum and pressure system
• One 120-gal. used product tank and five fresh fluid tanks with 360-gal. capacity
• Reel Cabinet with 25-ft. spring-retractable hose reels
• 8-hp on-board air compressor
• Used Filter Receptacle and Filter Stinger
• Booth # S-9643

Cummins Product Line

• Full lineup of engines extending from the compact 1.7-liter A Series to the powerful 15-liter QSX
• Fluid and air products from Cummins Filtration
• Power pack capability from Cummins Power Products
• Genset technology from Cummins Power Generation
• Booth # S-16013

Volvo ECR88 Compact Excavator

• 56.8-hp engine
• Weighs 18,078 lbs.
• Digging depth of 13 ft., 7 in.
• Digging force bucket 12,589 lbs.
• Tail swing radius of 47.6 in.
• Designed to meet the needs of operators who work in confining, narrow and restricted-space sites
• Auto-idling system gives the operater lower fuel consumption and longer engine life
• Hydraulic system supplies power and flow to the cylinders as needed
• Booth # N-2059 (indoor); G-134 (outdoor)

Manitou Maniscopics

• 18 models of fixed-frame and rotating telescopic forklifts
• Manufactures and distributes vertical-masted forklifts, telescopic handlers, truck-mounted forklifts, and masts to dealers and OEM customers throughout the United States
• Booth # G-195

Atlas Copco CC 2500 Demolition Attachment

• Provides more than 300 tons maximum cutting force at the jaw tip
• Single-pin jaw retention design improves operator visibility and reduces time needed to switch jaws
• Advanced speed valve for shorter cycle times and increased production
• Ideal for building and steel structure demolition, secondary reduction and material separation
• Available with both universal and steel-cutting jaws
• Booth # C-7321