CONEXPO-CON/AGG Product Preview 2008

CONEXPO-CON/AGG will have plenty of new construction equipment and technology on display for the rental industry. Here’s what you’ll see at the show:

• 125,000 construction industry professionals
• More than 2,000 exhibits
• 2.2 million net square feet of exhibit space
• 120 education sessions, certification programs and conferences

Here’s a look at some of the products you’ll be able to see on the exhibit floor. For more information, just circle the inquiry number on the reader service card included in this issue.

Coneqtec AP Cold Planers

• High-torque, direct-drive motors
• Fastest cutting drum head available (no remilling)
• Chews up the road into chunks, not powder
• Skid steer weight placed directly on drum
• 12- to 48-in. width sizes available
• Booth #G-180

Bobcat T320 Compact Track Loader

• 92-hp diesel engine
• Vertical lift path loader
• 3,200-lb. rated operating capacity
• 18-in. wide rubber tracks produce low ground disturbance, reduce ground pressure and provide extra traction
• 10-ft. 9-in. lift height
• Equipped with hydraulic system that produces 21.2 gpm
• Permanently lubricated idlers and rollers
• Features include fully adjustable suspension seat and state-of-the-art instrument panels
• Booth # G-100

Weber CR 3 Hd & CR 3 Diesel

• Lower hand/arm vibrations, reduced noise level through protection covers, and adjustable handle bar
• Optimized air intake system with cyclone filter to protect engine against dust and premature wear
• Equipped with the compaction control system from Weber MT (COMPATROL)
• Operating weight of 448 to 522 lbs.; operating width of 20 or 24 in. with extension plates
• Honda GX 270 (gasoline 9 hp) or Hatz 1 B 20 (diesel 4.6 hp)
• Working speed up to 66 fpm
• Booth #629

Leading Attachments Ripper Bucket

• Allows the excavator operator to rip through rock, pry stumps or dig V trenches
• Saves digging time, backfill time and backfill material
• Powerful like a single-pointed ripper, but allows operator to scoop
• Supplied with one powerful MTG KingMet tooth
• Available for any excavator above 6,000 lbs.
• Booth # N-1100

The Equipment Lock Co. Skidsteer Lock

• Locks both drive controls of all skid-steer loaders
• Available with barrel-style key
• Order multiple units keyed alike
• Also available with built-in changeable combination lock; set your own four-digit code
• Durable baked-on powder coat finish
• Booth # C-4645

Sage Oil 11126 Lube Trailer

• Patented vacuum and pressure system
• One 120-gal. used product tank and five fresh fluid tanks with 360-gal. capacity
• Reel Cabinet with 25-ft. spring-retractable hose reels
• 8-hp on-board air compressor
• Used Filter Receptacle and Filter Stinger
• Booth # S-9643

Cummins Product Line

• Full lineup of engines extending from the compact 1.7-liter A Series to the powerful 15-liter QSX
• Fluid and air products from Cummins Filtration
• Power pack capability from Cummins Power Products
• Genset technology from Cummins Power Generation
• Booth # S-16013

Volvo ECR88 Compact Excavator

• 56.8-hp engine
• Weighs 18,078 lbs.
• Digging depth of 13 ft., 7 in.
• Digging force bucket 12,589 lbs.
• Tail swing radius of 47.6 in.
• Designed to meet the needs of operators who work in confining, narrow and restricted-space sites
• Auto-idling system gives the operater lower fuel consumption and longer engine life
• Hydraulic system supplies power and flow to the cylinders as needed
• Booth # N-2059 (indoor); G-134 (outdoor)

Manitou Maniscopics

• 18 models of fixed-frame and rotating telescopic forklifts
• Manufactures and distributes vertical-masted forklifts, telescopic handlers, truck-mounted forklifts, and masts to dealers and OEM customers throughout the United States
• Booth # G-195

Atlas Copco CC 2500 Demolition Attachment

• Provides more than 300 tons maximum cutting force at the jaw tip
• Single-pin jaw retention design improves operator visibility and reduces time needed to switch jaws
• Advanced speed valve for shorter cycle times and increased production
• Ideal for building and steel structure demolition, secondary reduction and material separation
• Available with both universal and steel-cutting jaws
• Booth # C-7321

Mi-T-M Combination Air Compressor/Generator

• Unique air compressor with built-in generator system
• 13-hp/389-cc displacement Honda OHV engine
• Cast-iron crankcase, 120-volt alternator
• Industrial 3,500-watt generator, 15.7 cfm at 175 psi
• Two-stage compressor
• Seven-gauge base plate to reduce vibration
• Powder coated two-piece belt guard
• Powder coated 8-gal. twin tank receivers
• Booth #S-11328

John Deere 313 and 315 Skid Steers

• Operating capacities of 1,300 and 1,500 lbs.
• Bucket breakout force of 3,300 lbs.
• 59 in. wide for confined spaces (56-in. width optional)
• 10 in. by 16.5 in. tires for traction and flotation (7 x 15 in. tires optional)
• Heavy-duty drive chains never need adjusting
• 360-degree visibility
• Booth # N-1541

Allmand TLB-6235

• Full-time mechanical four-wheel-drive system and a servo-controlled hydrostatic transmission
• 35-hp Isuzu liquid-cooled diesel engine
• ESL (Extended Service Life) backhoe with up to a 9-ft. 10-in. digging depth and a 6,000-lb. bucket digging force
• 1/2-cu.-yd. loader bucket
• Load-sensing hydraulic steering system
• Planetary rear axle assembly
• Booth #G-184

RGC HydraSaws

• Four models with cutting depths from 5 1/4 to 9 1/2 in.
• Cut concrete, stone, masonry, brick, block, rebar, pipe, etc.
• For horizontal, vertical, wet, dry and underwater cutting and in confined spaces
• Hydraulic direct drive power maintains constant cutting speeds and torque
• Use with RGCs HydraCart for continuous floor and slab cutting
• Booth # S-8833

Subaru EX Series Engines

• First to utilize chain-driven OHC technology in the industrial air-cooled market
• Four models ranging from 4.5 to 9 hp
• OHC design and optimized-capacity rigid mufflers make EX engines quieter than other same-class engines
• Pent-roof-type combustion chamber allows a high compression ratio, which produces higher power and torque while limiting exhaust and fuel consumption
• Easier starts with an automatic decompression system, which reduces the required recoil pulling force by 30% to 40%
• Booth # S-16204

BJM KZN

• Constructed with the following abrasive-resistant 28% chrome iron components: agitator, wear plate and semi-open impeller
• Model is protected by Class H motor insulation, double silicon carbide mechanical seals, heavy-duty lip seal, stainless-steel shaft and shaft sleeve, and pump volutes cast from hardened ductile iron
• Top discharge pump
• Booth # S-10220

IronPlant Online Auction

• For buying and selling used heavy equipment and trucks
• Provide detailed inspection reports on hundreds of items and guarantee equipment condition with the IronClad Assurance
• Facilitates the sale and purchase of each item on its website to provide a secure transaction
• Booth # C-5522

Miller Electric CST 280 Stick/TIG Welders

• Now available in 8-pack rack
• Puts eight superior inverter welding machines in a rugged, lightweight rack
• At 653 lbs., it’s light enough to be lifted in an elevator
• Features lift eye and lift truck fork pockets
• Small footprint takes up minimal jobsite space
• Booth #S-660

General Equipment Hand-Held Floor Covering Scraper

• Electric-powered
• Removes carpet, tile, linoleum, mastics and more
• 5-in. cutting width
• Operates on standard 115-volt power source
• 1.2-hp electric motor
• Booth # S-11229

Sneller Stump Mill & Shredder

• Self-powered, not hydraulic
• Mounted with no modifications to an existing excavator or Sneller’s Multi-Task Carrier
• Bearing life up to 7,000 hours
• Attachments are ideal for wet jobs
• Booth # N-1903

Takeuchi TL120 Compact Track Loader

• Tipping load of 3,549 lbs., with a 4,821-lb. bucket breakout force in the bucket cylinders or 5,042 lbs. in the lift arm cylinders
• 52-hp turbo diesel engine with emergency engine shutdown system
• High sprocket planetary drive system provides efficient speed reduction and torque amplification, while eliminating drive chains, chain cases, axles and hubs
• Pilot-operated joystick controls provide precise fingertip control of loader and travel functions
• 59.5-in. operating width and 126.8-in. length allow for easy transport
• Booth #N-2659

Mody Top Discharge Dewatering Pumps

• Designed to fit in 6.5-, 8-, 12-, 16-, or 18-in. well casings
• Capable of handling contaminated fluids at most construction sites
• Rugged, epoxy-coated, stainless steel-fitted pumps
• Also available in complete 304/316 stainless-steel construction
• Booth # C-4737

Bandit Model 3590 Whole Tree Chipper

• For converting tops from logging and land clearing operations into dimensional chips
• Engine options up to 1,000-hp
• 30-in. chipping capacity with 30” x 48” chipper opening
• Track-style infeed conveyor easily pulls in whole trees
• New style discharge system fully loads end-opening chip vans
• Booth # C-7355

Wyco Internal Concrete Vibrator

• Pantented Square Head vibrator head design
• Provides 20 to 50% faster consolidation (square head versus round head)
• Delivers more torque with less amps
• Retains speed under heavier load
• Exceeds industry standards to assure safety
• Booth # S-9245

Terex PB16 & PB21 Power Buggies

• Simultaneous, variable-hydraulic dump and hydrostatic drive capability allow for feathering of loads in forward and reverse
• Two models available have a load capacity of 16 and 21 cu. ft.
• Power supplied through heavy-duty hydraulic pump and two efficiency driver motors for high speeds up to 7.25 mph at 4,000 rpm
• PB16 can carry a maximum load of 2,500 lbs., has a 3.5-in. discharge height, 13-hp Honda engine and 1,260-lb. operating weight
• PB21 carries a maximum load of 3,200 lbs., has a 4.75-in. discharge height, an 18-hp B&S engine and a 1,480-lb. operating weight
• Booth # G-200

Mustang Pressurized Cab Option

• Upgraded air conditioning/heater system to create an optional pressurized cab for Mustang compact track loaders models MTL16, MTL20, MTL25
• Virtually eliminates entry of dust, dirt and debris
• Noise kept at a minimum
• System comprised of updated interior ducting, featuring six adjustable louvers
• Special defroster vent located near front cab door
• Booth # N-2741

Work Area Protection Nite Lite

• Provides a non-glaring white light for all moving and static nighttime construction projects
• Lightweight and easily transportable
• Microprocessor-controlled electronics ignite the 400-watt Pulse Start Metal Halide lamp
• Draws only 4 amps at 120 volts AC from a 60-Hz electrical source
• Light output rated at 42,000 lumens for lighting up to a 15,000-sq.-ft. area
• Booth # S-11039

Genie GS-1930 Electric Scissor Lifts

• Standard with low-emission electric drives deliver quiet, convenient method for operation in sound-sensitive environments
• 2-ft. 6-in. profile allows for unit to pass easily through standard doorways
• Ideal for working in office buildings, shopping malls, hotels, schools and more
• Works to a height of 25 ft. and lifts up to 500 lbs.
• 30% gradeability
• Booth # G-200