NPE offers big results

• 80-hp John Deere diesel engine
• 7.5-ton hopper capacity
• 8- to 16-foot-wide mat with 6-inch depth
• Paves up to 140 fpm

Cimline HeatWave
Cimline's Heatwave Series of direct-fire melters are available in 30-, 90- and 115-gallon capacities for economical, efficient, gravity feed cracksealing.

• 90- and 115-gallon models feature auger-type sealant agitator powered by a 4-hp Honda engine for quicker melting times and uniform heating
• Tube-fired heating system constructed of two single-pass flues

Neal ESSP 550 Trailer
Neal's ESSP 550 trailer features a 550-gallon capacity.

• ESSP 50- or 100-gpm piston pump
• 16 pounds of sand per gallon capability
• Once-a-yaear flush out procedure
• Heavy-duty agitator drive with infinite forward/reverse
• Hand wand and 75 feet of hose

Asphalt Anders 3436
The Anders 3436 3-ton, seven-wheel pneumatic roller incorporates a wobble-wheel system for a quality finish.

• Hydrostatic transmission
• 38-hp Kubota diesel
• Pressurized water spray
• Certified ROPS

Volvo Wheeled Pavers
The PF-6160 and PF-6170 feature an auger system that is now independent of the conveyor system.

• Auger and conveyor drives use sonic sensors for more precise handling of material
• 10-foot screed width and a maximum paving width of 26 feet
• Paving speed of 293 fpm
• 14.4-ton hopper allows a practical production rate of 820 tph
• 205-hp Cummins Tier III engine
• Dual control stations
• Operator station features a new layout and a digital display with onboard diagnostic capabilities

UPM Kold FloPourable Crackfiller
Unique Paving Materials modified asphalt emulsion crack filler can be used on asphalt and concrete pavements.

• Fast curing driveable within 30 minutes
• Use for roads, highways, parking lots and driveways
• Available in drums, buckets and bottles

Gehl 1648 and 1448 Pavers
These Power Box asphalt pavers are designed for all kinds of commercial and municipal applications.

• Two, fully adjustable screed options
• 4- to 13-foot paving widths
• 4-foot 9-inch to 5-foot 5-inch wall height for better operator visibility
• 1648 has the option of attaching material augers to the extensions
• 41-hp Isuzu water-cooled engine

BOMAG Cold Planer Milling Machines
The BM1000/30 and BM1300/30 feature centrally mounted cutting drums that allow precise milling next to walls, curbs and other obstructions.

• 39.6- (BM1000/30) and 51.4-inch (BM1300/30) cutting widths with milling depths up to 12.6 inches
• 275-hp Caterpillar diesel engines
• Direct mechanical drive design of cutting drum provides maximum power transfer while reducing external losses
• Centrally located "over-the-cut" operator's position and sliding operator's seat allow better jobsite visibility

Crafco PavePrep
Crafco's PavePrep reduces premature joint failures and minimizes reflective cracking in new asphalt overlays.

• A high-density mastic laminated with tough woven polyester
• Designed to withstand stress concentrations at pavement joints
• Place over the joint and roll with a pneumatic roller to ensure bond
• Also available in a self-adhesive version that requires no tack coat

Multiquip AR-13H Tandem Drum Roller
The AR-13H is a 3,088-pound ride-on roller built for asphalt, and sublayer granular and mixed soil compaction jobs.

• 3,100 pounds of centrifugal force with 4,000 vpm
• 35.7-inch drum width
• Travel speeds up to 4.8 mph
• 19-inch curb clearance
• 60-gallon water tank
• Rear drum can be filled with water for extra ballast