Rental Product Gallery February 2006

CareLift ZB32032 Telescopic Reach Forklift

• Capacity of 32,000 lbs.
• Lift height of 32 ft.
• Includes a 173-hp Cummins QSB 5.9 engine, Dana T32,000 powershift transmission and AxelTech axles
• Features three modes of steering as well as frame leveling
• Numerous tool carrier attachments available

Genie GR-20 Runabout

• Stiffer mast structure with improved mast flaps
• New mechanical pothole system allows for 2-in. ground clearance
• Reduction of platform step-in height to 15 in.
• Zero inside turning radius
• Proportional drive capabilities
• New compact design (53" x 31.5"), hydraulic drive and mechanical steering systems provide better mobility in and out of tight areas and provide for easy passage through doorways and elevators
• Total of nine available platform options

Haulotte HA 100 JRT

• 105-ft. maximum working height with a platform height of 98 ft. 5 in.
• 69-ft. 11-in. maximum horizontal outreach
• 37-ft. 3-in. up and over clearance
• 551-lb. platform capacity
• Standard four-wheel drive and steer
• 15-in. ground clearance
• 45-percent gradeability
• Hydraulic differential lock
• Extendable axles

Wap Attix 19 Series from Alto

• Series of wet and dry vacuums
• 19-gal. canister, steel frame, stainless-steel canister, two-stage turbines and bypass motors as well as an exclusive tilting, removable container
• Tilt feature allows the operator to easily empty the canister without having to turn over the entire vacuum
• Removable container gives the operator one more emptying option
• Vacuum operates with an air flow of 140 cfm and a water lift of 105 inches, while producing only 57 dB(A)

Kaeser M14 Rotary Screw Compressor

• Portable rotary screw compressor
• Sigma Profile airend
• 18-hp industrial gasoline engine
• Produces 50 scfm at 100 psig
• Lightweight wheel-mounted package with hinged handle bar
• Vibration isolator pads absorb shock and ensures quiet operation

Subaru Robin Silent Series Generators

• Models include R1700i at 1,650 watts, RG3200iS at 3,200 watts and RG4300iS at 4,300 watts
• Engines run at slower speed for low power use and automatically increases as more electrical power is required
• Advanced reverse cooling design allows units to be fully enclosed in a sound-absorbing poly-resin enclosure
• Subaru Robin gasoline engines

Shindaiwa DGK45C Ultra Quiet Generator

• Has been upgraded to ultra-quiet status
• Noise levels of 53 dB(A) at idle and 56 dB(A) at full load
• Low fuel consumption
• Compact size
• Reduced weight

Garrett Metal Detectors Ace 250 and 150

• For locating lost, hidden or abandoned treasure and other metal objects
• Feature exclusive Graphic Target Analyzer (GTA) technology, sensitivity adjustments, continuous coin depth indicator and target ID legend
• The Ace 250 also offers accept/reject trash elimination, electronic pinpoint and continuous battery life indicator
• 6.5" x 9" PROformance submersible searchcoil with two optional coils including the 4.5-in. Sniper searchcoil and
  9" x 12" PROformance searchcoil

American Compaction Diamond Compaction Wheels

• For use on backhoes, excavators, skid steers and compact excavators
• Over 30 models with sizes from 4 to 72 in.
• Each wheel equipped with cutting edge and choice of mounting plates
• "Triple" Seal Bearing with rock protectors

Case 400 Series Skid Steers

• Five radial-lift and three vertical-lift models with maximum rated loads from 1,500 to 3,000 lbs.
• 49- to 82-net-hp Tier II-certified engines
• Extra-heavy-duty design
• New cooling system provides balanced cooling to the engine and hydraulics
• Low-effort servo-hydrostatic controls
• Factory-ready cab with optional air conditioning available for Models 430 and above
• Over 75 attachments available

Bandit 3400 Stump Grinder

• For removing stumps in land- and lot-clearing projects, under power lines and beneath right-of-ways
• Equipped with 140 hp and a unique hydrostatic cutter wheel drive with hydraulic, planetary motor built into the cutter head, which eliminates the need for a belt, jackshaft or transfer case type drive
• 305 Cat rubber-tracked undercarriage allows machine to go almost anywhere and work in soft or uneven ground conditions
• Radio remote controls all functions from any position

Bobcat Boring Attachment

• Allows Bobcat mini track loaders and 463 skid-steer loaders to install utilities under driveways, sidewalks and other obstructions
• Installs electrical, telephone, cable and flexible water pipe up to 2 in. in diameter with minimal disturbance
• Low-speed, high-torque hydraulic motor drives a screw-type boring bit through the ground as machine is driven forward
• Backreams with reaming bit
• Various-sized boring tools available including carbide bits

E-Z Trench Bedscaper BE310-A

• Landscaping trencher
• 6.5-hp Honda GX engine with a centrifugal clutch
• Handle-mounted controls for the throttle
• Adjustable cutting depth and handle height

Allmand TLB-6235

• Full-time mechanical four-wheel-drive system and a servo-controlled hydrostatic transmission
• 35-hp Isuzu liquid-cooled diesel engine
• ESL (Extended Service Life) backhoe with up to a 9-ft. 10-in. digging depth and a 6,000-lb. bucket digging force
• 2/3-cu.-yd. loader bucket
• Load-sensing hydraulic steering system

Kubota E-Series Engine

• E-TVCS (three vortex combustion system) technology
• Offers reduced soot, unburned HC and CO emissions
• Produces less NOx than traditional direct-injection systems

Gehl CT-Series Telescopic Handlers

• CT5-16, CT5-16 Turbo, CT6-18 Low Profile, CT6-18 Turbo and CT7-23 Turbo feature maximum capacities from 5,000 to 7,000 lbs.
• Maximum lift heights from 16 ft. 2 in. to 22 ft. 7 in.
• Rated capacities from 5,000 to 6,000 lbs.
• 58- to 101-hp turbocharged and naturally aspirated Tier II diesel engines
• Pilot-controlled hydraulic system
• Hydraulic quick-attach system and standard auxiliary hydraulics

Ingersoll Rand Power Buggy

• 16.5-cu.-ft. power buggy can be used for concrete spreading, demolition debris removal, spot pouring and more
• Available with either a steel or poly-type tank
• 6 in. of bucket clearance in fully dumped position
• 13-hp Honda engine
• Electric or recoil start
• Optional foam-filled tires to increase stability

New Holland C185 Compact Track Loader

• 2,400-lb. rated operating capacity
• Super Boom vertical lift linkage
• Two-speed transmission delivers travel speeds up to 8 mph
• Optional hydraulic mount plate allows operator to securely attach or remove buckets and attachments without leaving the seat
• Enhanced visibility with no rear frame towers to block operator's view

Morbark Stump Grinders

• Top speed of 3.2 mph for getting to the stump faster
• Unique cutter wheel and tooth design enables them to grind stumps more quickly
• Patent-pending boom design creates a 52-in. cutting arc
• Hexagon-shaped cutter wheel
• Six multi-tipped cutting tools fastened with one bolt each provide the grinding performance of 24 teeth
• Up to 8 cu. ft. of chip retention space allows for more continuous grinding and less repositioning

Niftylift Traction Drive System

• Available on its range of trailer-mounted boom lift platforms
• Allows operator to unhitch, maneuver and position even a large trailer mount quickly and safely
• Controlled via joystick positioned next to the towing eye
• Hydraulic motors transmit drive directly to the wheels

Kubota U-Series ZTS Excavators

• 1.5-ton U15, 2.5-ton U25 and 4.5-ton U45 zero tailswing excavators are designed for work in tight spaces
• No rear overhang beyond the width of the tracks
• U15 has a variable track width and comes with a quick-coupler bucket set with 3,417 lbs. of breakout force
• U25 has 5,765 lbs. of breakout force and an overall width of 4 ft. 11 in.
• U45 delivers 9,685 lbs. of breakout force and features an angle blade with floating positioning, as well as an auto idle system

Towmaster Contrail C-14 Drop-Deck Trailer

• 13,600-lb. capacity
• Oak wood deck
• 7,000-lb. Dexter Torflex axles
• Spring-assist ramps
• Auto-Latch ramp hold-ups

Partner K 750 Power Cutter

• Dual Charge engine technology delivers 5 hp while producing 70 percent fewer emissions and providing greater fuel economy
• Vibration dampening system offers 50 percent lower vibrations and smoother cutting
• 25 percent lower noise level due to a larger muffler
• Additional features include Active Air Filtration, SmartCarb carburetor, automatic decompression valve and DuraStarter dust-sealed starter

Stone Champion Mixers

• 12 different Champion concrete mixers in sizes from 2 to 12 cu. ft.
• Available in standard side and end-dump versions
• Engine options include Briggs & Stratton, Honda and Robin
• 9-cu.-ft. size available with a polyethylene drum option
• Lifetime warranty on drum bearings and seals and a two-year drum warranty

Terex HR1.5, HR1.6 and HR2.0 Compact Excavators

• Operating weights from 3,395 to 4,300 lbs.
• Breakout forces from 3,420 to 3,535 lbs.
• 18-hp, three-cylinder Mitsubishi diesel engine
• Improved dampening for a quiet ride
• Right-hand side, ABS-molded console contains throttle, starter switch and electric toggle switches

Target G2 Tile Saws from Electrolux

• Tilematic G2 cuts 16 in. diagonally, while the Super Tilematic G2 cuts 22 in. diagonally
• Tilematic G2 rip cuts a 24-in. tile; Super Tilematic G2 rip cuts a 31-in. tile
• 1 1/2-hp Baldor continuous-duty motor is totally enclosed and fan cooled

Lay-Mor Model 2A Walk-Behind Sweeper

• 40-in. directional broom
• 5 1/2-hp Honda or 5-hp Briggs & Stratton
• Dual drive wheel
• Adjustable broom angle at handlebar
• Sprinkler system available

Gensco Robend Rebar Bender

• Capacity to #5 (5/8-in.) rebar
• 115-volt single-phase
• Automatic angle setting with auto stop
• Maximum bending to 180 degrees
• Supplied with three bending formers and available with formers for pipe
• Weighs approximately 28 lbs.

Ground Heaters Arctic Bear HD

• Indirect-fired heater designed to deliver clean, dry heat while tolerating the most extreme cold-weather conditions
• Can withstand ambient temperatures down to -60 degrees F and winds up to 70 mph
• 100-percent stainless-steel firebox and heat exchanger
• All hoses and wiring are arctic grade
• Powered by a CSA-certified, 10KVA, 240-volt AC, three-phase generator which is driven by a Kubota 1,800-rpm diesel engine
• Offers heat output of 500,000 to 850,000 BTU/hr

Thieman Toplifter Series Liftgates

• 42- or 44-in. platform and is rated with a 1,500-lb. capacity
• Standard Nitrotec pins and Polylube bushings at all pivot points for reduced maintenance
• Standard 5,000-lb. tow rated bumper and dual cylinders
• Torsion Assist on all 42-in. deep steel platforms
• Options include: variety of platform materials, light kit, in-cab shut-off switch and remote pendant controls

McLaren Protrac

• Over-the-tire skid-steer tracks provide maximum traction and flotation in mud, sand and snow
• Heat-treated, hammer-forged pins and links
• Crafted with specially formulated steel, not cast iron
• ProTrac Diamond suitable for mud, clay, loose rock and sand
• ProTrac Magnum offers more pushing and pulling power in deep mud or for demolition and land clearing
• ProTrac Rubber allows for safe use on asphalt or grass

Astec RT160

• 24-hp Honda gasoline engine
• Trenches to 48-in. deep and from 4 to 8 in. wide
• Two independent hydraulic pumps control the ground drive and trencher drive
• Hydraulic trencher drive system directly connected to the trencher head shaft
• Hydrostatic ground drive provides inching precision and infinitely variable speeds for working in different applications and conditions
• Electric start and single-joystick operation, as well as Astec's unique "automatic parking brake" operator presence system

Huskie Hydraulic Hammer Series II

• HH150-2 through HH1000-2 Series II breakers feature impact energies from 200 to 1,200 ft.-lbs.
• Redesigned operating piston, main valve and internal porting for increased power
• Slight increase in low-pressure nitrogen gas charge
• Wider input flow range for use on low- and high-output carriers
• Modular design with fewer than 40 total parts
• Multi-fit bracket for mounting on various prime movers

Vermeer RT350

• 37-hp ride-on trencher
• Backfill capabilities
• Trenching depth to 48 in.
• Patented creep override for better machine control

Trench Shoring Services Product Line

• Steel trench boxes from 2 to 12 ft.
• One-, three- and four-sided shoring, as well as cofferdams and manhole boxes
• Light-duty aluminum shoring and medium-duty aluminum trench boxes
• Manhole casings and frames
• End closure and doghouse panels, H-beams, bore pits, bedding and rock boxes and other products available

Construction Attachments Multipurpose Buckets

• Enable a tractor, skid steer or backhoe-loader to scrape, bottom dump, clamp, dig, doze, clam load, backfill and load material
• 54- to 72-in. widths with 6.7- to 9.1-cu.-ft. heaped capacities
• 19-in. maximum clam opening
• Pre-drilled front cutting edge to accept bolt-on reversible cutting edge or teeth
• Rear hitch designed to match carrier hitch dimensions
• Optional One-Touch hydraulic kit to actuate clam circuit on tractors without auxiliary hydraulics

Arrowhead Rockdrill S Breaker Range

• Reduced noise and vibration via vibration-silencing technology
• Compressed urethane mounting section eliminates use of cross bolts for reduced wear and maintenance
• Ratio of power to speed provides sufficient power for large jobs

BLS Poly Bolt-On Track Pads

• Allows easier installation and removal of track pads from grousers
• Enables reuse of predrilled steel triple grouser by replacing only the polyurethane bolt-on track pad
• Available for asphalt pavers from Ingersoll Rand, LeeBoy and Mauldin
• Available for milling machines from Bitelli, Caterpillar, CMI, Dynapac, Ingersoll Rand, Marini, Roadtec and Wirtgen
• Available for concrete slipform pavers from Gomaco, Miller Formless and Power Curbers