Product Spotlight - Equipment and Accessories August 2005

SP Series Sealcoating Machines

  • Round tank design with full-sweep agitation
  • Available with sand pumper material pump for dual capabilities, spray and squeegee
  • 200- and 300-gal. capacities
  • Rear wheel drive
  • Sealmaster

    350 Econo Trailer

  • High-density polyethylene tank
  • 2-paddle, manual agitation; hydraulic optional
  • 1-in. dual-diaphragm pump w/ filtered air supply line
  • 75-ft., ¾-in., 300-psi hose; 6-ft. wand
  • Equipt Mfg., Inc.

    SC300 Seal Coater

  • 300-gal. ride-on machine
  • Contours of tank bottom conform to agitator
  • Three-wheel design for direct drive to rear wheels
  • 24-hp Honda V-twin engine
  • Layton Mfg. Co.

    SR-700 Trailer w/ Blower

  • 2-in. Wilden pumps
  • 3-gal. filter pots
  • Hannay hose reels with 100 ft. of hose
  • Rubber wipers keep tank inside clean
  • Seal-Rite

    Tow Boy Seal-A-Lot

  • Adjusts from 3- to 8-ft. wide
  • Easy clean up
  • Heated tank available
  • Will smooth out any type of liquid
  • Lets you decide how thick or thin to apply the liquid
  • Tow Boy Co.

    Power-agitated Tanks

  • 2-in.-diameter solid shaft
  • Truck or trailer mount
  • Robin 6-hp industrial engine
  • Hydraulic agitation with forward/reverse
  • 3-in. product discharge line and valve
  • Pacific Coatings, Inc.

    ESSP 550 Trailer

  • 550 gal.
  • ESSP 50- or 100-gpm piston pump
  • 16 lbs. of sand per gal. capability
  • Heavy-duty agitator drive with infinite forward/reverse
  • Hand wand and 75 ft. of hose
  • Neal Equipment LLC

    DPS550T Applicator

  • 300, 550, 1,000, or 1,500 gal.
  • Use with coal tar sealers
  • Skid- or trailer-mounted
  • Two-stage, tank-mounted air compressor with 30-gal. tank
  • 9-hp Honda engine
  • 1½-in. cast iron diaphragm pump
  • Hydraulic, full-sweep agitation
  • Marathon Equipment, Inc.

    Seal Coat Sprayer

  • 5.5-hp Honda engine
  • 10-gal.-per-min. pump
  • Spray wand with 100-ft. hose and tip
  • Fulflo relief valve
  • 4-in.-diameter filling hole
  • 1-in. drain pipe under tank MTL
  • Fabrication/Montreal Sealer

    Loading