New Rental Products June 2005

The following are products recently introduced to the rental market, as well as models which have undergone significant changes.

1123012845617 10305799

Diamond Systems Chop Saw SDT-1410

The Chop Saw SDT 1410 is a dry/wet cutting masonry saw with a 14-in. blade that effectively cuts block up to 5 in. thick in a single pass. It weighs only 75 lbs. but is powered by a 3-hp carbon brush motor. A clear-view air filter is easily maintained and protects the motor for longer life. The table locking mechanism facilitates the saw’s chopping operation and the reinforced rigid frame construction provides steady precision cutting. Optional accessories include a stand, wet kit and 14-in. MA-300 Pro 11 blade.

RedMax HC510DVCut-Off Saw

RedMax’s new heavy-duty, user-friendly cut-off saw is especially suited to those renting to do-it-yourselfers. The HC510DV is equipped with a dust catcher, powered by a high-rpm fan, that swallows up dust with no blow-back. The powerful 49cc, two-cycle engine is further protected by a large, three-stage air cleaner and is equipped with a semi-automatic decompression system which reduces starting effort and kickback. With a center balance design and eight rubber anti-vibration points to reduce vibration, the HC510DV is easy and comfortable to use.

ASV Posi-Track RCV

The Posi-Track RCV vertical lift machine offers high-flow hydraulics, a hydraulic quick attach and selectable self-leveling. Powered by a naturally aspirated Perkins diesel engine rated at 86 gross hp, the RCS features a 4,000-lb. rated operating capacity (50 percent tip load), 131-in. lift height and 34-in. forward reach. Other features include a suspended rubber track undercarriage and hydraulic quick attach. Tracks are directly driven by single-speed drive motors with travel speeds up to 6 mph while the hydraulic system provides up to 38 gpm to the standard high-flow auxiliary circuit on demand or 20 gpm to the low-flow circuit.

Lincoln Weldanpower 125

The Weldanpower 125 from Lincoln offers DC Stick welding power with 125 DC amps for a variety of projects and 5,500 surge watts of AC generator power. Unit works on steel, stainless steel, cast iron and hardfacing projects and also provides 120- or 240-volt AC generator power for lights, tools, pumps or emergency power. The Weldanpower 125 is powered by a Robin/Subaru 9-hp EX 27 engine featuring a cast-iron cylinder liner for long service life.

WennSoft Service Management for Axapta

WennSoft introduces Service Management for Axapta to serve as a solution for warranty tracking, installation, work orders and field service operations. Capable of running either Microsoft SQL or Oracle databases and can be deployed as a web-based application, this product also offers the option of running in a client server environment. WennSoft Service Management will offer the functionality to facilitate efficient service call capture and assignment, dispatch and scheduling, contract management and more.

Terex SKL160H Wheel Loader

The new SKL160H offers an operating load and full turn position of 7,000 lbs. It sports a 2.25-cu.-yd. capacity and an articulated tipping load of 14,000 lbs. Powered by a 102-hp Perkins turbocharged diesel engine, the SKL160H provides a Z-bar for breakout force and additional linkage for parallel lifts. Unit comes standard with the third spool, auxiliary off the front of the machine, allowing operators to add various attachments, and features the option for an attachment removal system.

Wylie Dump Trailer

Wylie’s new dump trailer can carry a skid steer to a jobsite, be loaded with soil, rocks or other materials and hydraulically dump those materials where needed. It can be towed behind any 3/4-ton or larger truck. The heavy-duty frame is constructed of 6-in. channel iron while the 6 1/2- by 12-ft. box is made of 10-gauge steel. The trailer is equipped with a height-adjustable 2 5/16-in. ball hitch (or 3-in. pintle), surge brakes, tandem 5,200-lb. axles and 7.50 by 16LT highway tires.

Hitachi Dash-Two Compact Excavators

Hitachi’ offers upgrades to its two largest Dash-Two compact excavators. Faster operating speeds and more drawbar pull are combined with auto-idle to reduce fuel consumption while a new, long arm and heavy counterweight option provide an additional foot of dig depth and reach. Structural improvements include a rounded X-beam track frame for easy mud removal, a 50-degree forward tilt operator’s station and a sliding engine cover for fast and easy servicing.

AUSA C150H

The C150H represents a new generation of 1,500-Kg-load-capacity rough-terrain forklifts. Features include a state-of-the-art power train, new engine and an innovative hydrostatic drive, cabin and counterweight. Unit also creates low exhaust and noise emissions. The Total Control system gives the operator full control of all functions through the joystick AUSA has been building into its vehicles over recent years. By means of this system, the operator carries out all lifting operations with his right hand while controlling the steering wheel with his left.

Ground Heaters HX-Series

The HX-Series Heat Xchangers are intended for use with both the Sahara Air Heater and traditional Ground Heaters product lines. Powerful liquid-to-air heat exchangers, the HX-Series can turn any Ground Heater model into a highly effective air heater. This gives the contractor working in the winter the ability to thaw ground, cure concrete and then provide temporary heat to the enclosed structure, all with the same machine. Because there are no combustion by-products created by the Heat Xchangers, they can use air from the workspace instead of colder outdoor air, which requires less fuel to heat and are therefore highly economical to use.

Takeuchi TB1140 Excavator

The 31,370-lb. TB1140 features a two-speed travel system with automatic shift down. Other features include an 18-ft. digging depth with 22,188-lb. bucket breakout force, 28.1-ft. reach at ground level and 20.4-ft. dump height. Unit is powered by a 83.4-hp EPA exhaust-compliant Isuzu turbo diesel engine and offers standard primary and secondary auxiliary hydraulic circuits with thumb-operated proportional controls, offset swing boom, heavy-duty dozer blade and air conditioning.

Premier Skid Steer Trencher Attachments

Premier’s T150 and T250 trencher attachments offer a wide range of speed and torque combinations to fit skid steer requirements. Features include a heavy-duty planetary drive system, replaceable spoil auger, built-in skid shoe, manual side shift, heavy-duty crumber shoe assembly and more. Trenchers offer 3- to 4-ft. digging depths while 6- to 12-in. widths are optional.

Kanga Contractors Kit

The Contractors Kit consists of a custom trailer specifically tailored for industries such as landscape construction/maintenance, fencing contractors, light construction, internal and external demolition and more. Kanga has developed a complete package of equipment for each industry consisting of attachments such as 4 in 1 buckets, trenchers, power heads and augers, rock breakers and roto tillers and more. Trailer options are available for the whole Kanga range of machines from the 16-hp Kanga Kid to the 24-hp 7 Series Fat Track.

Essex Silver-Line Velcro Drum

Designed for the Essex Silver-Line SL8 floor sander, the new velcro drum is made from high-density foam rubber and incorporates the hook and loop technology for installation of paper. Velcro drum comes complete with all parts, ready to install on the SL8.

Stud Magnet from Magnet Source

The Stud Magnet quickly and accurately locates studs behind drywalls. The product contains powerful and permanent neodymium magnets, which are attracted to nails and screws within hidden studs. Once a stud is located, the Stud Magnet attracts to the wall, freeing hands for tasks and eliminating the need to mark the wall. Tool needs no batteries and is just 4 in. long. It not only locates studs, but also has a built-in nail starter and acts as a plumb line anchor when a string and weight are attached to a hole in the bottom.

Latest