Phoenix 1200 mobile trommel with hydraulically adjustable machine working angle and angle-adjustable hydraulically folding tail conveyor with 180° arc
Hobart McKay Welding Products
McKay welding products are designed to improve resistance against abrasion and impact and extend implement parts life.
ArmorWear self-shielded flux-cored wire for overlay on carbon and low alloy steels
VertiWear 600 gas-shielded flux-cored wire for surfacing mild and low alloy steel components prone to moderate abrasive wear and medium to high impact
VertiWear AP for buildup or overlay on austenitic manganese steel or for joining it to manganese, carbon or low alloy steel
Mark Systems AGILIS Software
AGILIS software integrates equipment asset management and job management into a fully featured construction accounting system.
Equipment asset management module features machine-to-machine (M2M) technology for real-time status of engine use and location
Integrates work orders, parts inventory and maintenance tracking
Produces break-even analyses and profit and loss statements
Job management module provides easy, accurate management of people, equipment and materials while providing automatic time and materials collection for billing
The Screen Machine 4043T Crusher
The 4043T portable crushing plant features a curtain relief system that allows for remote blockage clearance during operation.
Caterpillar tracks and 300-hp Caterpillar C-9 engine
40" x 43" horizontal impact crusher with 43" x 32" feed inlet opening
Fully remote-controlled operation
Split housing design
40-in.-diameter variable-speed rotor with one-piece shaft design
Three-stage crushing process
Terex/CMI PR950 Roto-Mill
The PR950 Roto-Mill Pavement Profiler makes cuts up to 15 in. deep with a standard full-lane cutting width of 86 in. at working speeds reaching 170 fpm.
950-hp Cummins six-cylinder diesel engine
Power-band, V-belt direct-drive system
Quick-mount cutter design with optional 150-in. cutting drum
Four steering modes
42-in. high-capacity conveyor swings 60° to the left or right of center
Three- or four-track designs
Genie Z-135/70 Boom
The Z-135/70 articulating boom offers a maximum working height of 141 ft., horizontal outreach of 69 ft. 9 in. and up-and-over clearance of 75 ft. 6 in.
X-Chassis axle configuration enables each axle to pivot from vertical mounting pins for easy setup
Jib-eXtend jib provides a fully extended length of 20 ft.
Features full-traction, four-wheel drive and four-wheel steer system with four steering modes
8-ft. self-leveling platform
360° continuous turntable rotation
Bernard Welding Products
Bernard Welding Equipment introduces Centerfire MIG welding consumables and the Q-Gun line of MIG guns.
Centerfire gas diffusers, "Drop-In" contact tips and nozzles incorporating built-in spatter shields
Q-Gun with Jump Liner technology features a straight handle torch, plus various trigger and switch options
Q-Guns available in 150- to 600-amp models and amperage ratings at 100% duty cycle using CO2 gas
Kaeser M57 Mobilair
The 45-hp M57 Mobilair delivers 210 cfm at 100 psig.
Sigma Profile direct-drive airend combined with an oversized fuel tank provide 10 hours of uninterrupted operation
Heavy-duty, four-cylinder diesel engine with cold-start battery
Solid steel floor and panel insulation for reduced noise levels
Fully powder-coated enclosure with gull wing doors
Torsion bar suspension system with oversized tires
Smith Dual-Guard Torch Kits
The Dual-Guard Torch features an in-head flash arrestor coupled with three-tube construction that keeps gases separate until they mix in the head.
Large-diameter, heavy wall stainless tubes enable high-volume gas flow with the capacity to cut steel up to 24 in. thick
Forged manganese bronze hammer-style head
Soft seat design allows cutting tip changes by hand
75°, 90° and 180° head angles
Standard lengths from 17 to 48 in.
Stellar 14528 Telescopic Crane
The 14528 telescopic crane has a 70,000-ft.-lb. capacity with a maximum double part line lifting capacity of 14,000 lbs.
