When you invest in a machine like a sealcoating tank, you want it to last a long time and to work properly in order to bring in profits. The most important thing you can do to keep your machinery working is to perform routine maintenance on it. Most contractors have a maintenance program — some record every detail of their maintenance while others perform it casually yet regularly. What works for your business will depend on its size and what you are comfortable with.
Once you have a maintenance system in mind, you have to decide what maintenance needs to be done daily, weekly, monthly, and annually. Sealcoating tanks are basic machines, and generally easy to take care, but the maintenance needs to be done in order to keep them working properly. If you are starting up a maintenance program for the first time, Brent Loutzenhiser, owner of Seal-Rite, has some advice.
"Read your manuals on your equipment and do as the manufacturer recommends," he says. "Also, make sure you keep an eye and ear out for anything unusual during routine checks. Catching something before it becomes a major problem down the road will help prevent breakdowns."
On a daily basis, you should check your fluid levels, drain your air compressor water, and check your tire pressure.
Weekly you should check your oil and air breathers, depending on their use. They may need to be cleaned or changed, which would be necessary more so on a monthly basis, but checking them each week is important.
A monthly maintenance item would include changing your oil.
Tim Peek is the owner of TLT Sealcoating and Striping Services in Albany, NY. He has one sealcoating machine and a handful of other equipment such as a dump truck and a skid-steer loader. Peek has been a mechanic for more than 20 years, so machine maintenance comes naturally to him. He does all the maintenance on his equipment himself. As far as a maintenance program, Peek just makes sure maintenance gets done when it needs to be done.
"Once you become familiar with your equipment, you know what to do," he says. "Do you check your oil in your car every day? No. And obviously all my equipment is here, and I know it, so if I check my oil once every few days that's fine."
Garrett Wilson, owner of American Spray Tech in Pfafftown, NC, has one sealcoating tank, and has built a simple, yet effective maintenance program around it. In addition to regular maintenance checks, Wilson has some great tips for keeping your machinery in top shape. He suggests getting into the habit of examining your hoses.
"When the hoses start getting worn, you'll want to either cut off the worn area or replace the hoses so they don't rupture on you on the job," he says. "When you're winding up the hose, examine it to see if any spots have gotten down to the threads."
Wilson also warns against letting your sealcoating machine sit idle for more than a few days.
In addition to the daily, weekly, and monthly maintenance checks, Wilson keeps spare parts on hand in case something goes down without warning.
"We keep a pump, but a pump tends to be fairly expensive. You can also keep a rebuild kit," he says. "If we're out on a job and the pump goes down, we don't have to go all the way back, we can just change it out on the job in 15 or 20 minutes."
Winterization and annual maintenance
Winterizing your sealcoating unit is an important protective measure that is necessary to do every year unless you keep your machine sitting in a climate controlled facility. It's a simple process that involves rinsing out your tank and pump with water, then running some type of fluid with a very low freezing point through the system. Some people use antifreeze, Loutzenhiser says windshield wiper fluid will do the trick.
After you've run the antifreeze or windshield wiper fluid into your system, let it sit for a minute or two. Then open up all the valves and dry fire the system to remove most of the fluid. This leaves windshield wiper fluid or antifreeze, rather than water, sitting in any low spots.