Cut Corners with Concrete Chainsaws

Truckbed Tools

There are numerous tools you can throw in the back of your pickup truck or service vehicles. But when it comes to cutting through challenging materials, you need a tool that can slice through whatever you encounter. That’s where concrete chainsaws come in. These versatile saws can plunge cut into walls or cut corners where needed. Here’s a closer look at some of the newest models available.

Stanley Lynx LCC31 Concrete Saw

The hydraulic-powered Lynx LCC31 concrete cutting chainsaw from Stanley Hydraulic Tools will cut concrete (wire or rebar reinforced), brick, block, masonry and stone. It can cut square corners for openings and wall cut-outs, as well as plunge cut into walls and make full-depth cuts at one pass. The unit offers a 15- or 18-in. cut (bar) length and 35- or 38-in. length with bar and chain. Two different chain types are available. Ergonomic handles and guards ensure operator comfort.

CS Unitec CS 71773 Air Saw

The CS 71773 pneumatic concrete chainsaw produces plunge cuts up to 14 in. deep in one pass and quickly cuts mechanical openings, irregular shapes and square corners.

It can be used hand-held or with the optional SpeedHook guide to make straight cuts through walls and other surfaces. Its 11- or 15-in.-long guidebars lubricate the chain and flush the cutting area with water. The unit can be used with a range of diamond saw chains.

Partner K950 Chain

Partner’s K950 Chain produces 15-in.-deep cuts from one side and can make square openings as small as 4 3/8” x 4 3/8”. It is powered by a 6.2-hp, air-cooled, two-cycle gasoline engine. The Active Air Filtration system features three separate filter systems. A SmartCarb carburetor with integrated filter compensation automatically adjusts the fuel/air ratio as the air filters become dirty. The unit also includes an Easy Start decompression valve and Dura Starter sealed starter mechanism.

RedZaw RZ60 Gas Saw

The 17-lb. RedZaw RZ60 Utility Gas Saw from the RedZaw product division of ICS, Blount International can cut masonry materials, as well as concrete and stone. The unit is capable of plunge cuts to 9 in. and can cut square openings with no over-cuts in material as thick as 8 in. Power is provided by a 64cc, 4.2-hp, two-cycle gas engine. An advanced air intake and filtration system are designed for wet-cutting aggregate materials.

Stow Cutoff Saws

The 21-lb. SHS62 and 23-lb. SHS81 gas cutoff saws slice concrete, tile, ceramics, pipe and more.

  • Reversible blade flange handles 20mm and 1-in. blade arbors
  • Operate 12- or 14-in. blades
  • Triple-stage air filtration system
  • 4.7- and 6.3-hp, two-cycle, EPA-approved gasoline engines
  • Reversible cutting arm

    Campbell Hausfeld Maxus Impact Wrenches

    The MXT586 3/4-in. and MXT602 1/2-in. impact wrenches feature a built-in power regulator for increased control.

  • MXT586 delivers 1,000 maximum ft.-lbs. of torque, while the MXT602 delivers 500 ft.-lbs. of torque
  • Pin clutch provides balanced impact and reduced vibration Soft Santoprene grip for operator comfort

    Kaeser KPB Series Paving Breakers

    The KPB series of ergonomic paving breakers includes 50-, 60- and 90-lb. models.

    Integral noise mufflers reduce noise pollution and the risk of hearing loss Available tool steels include chisels, points, asphalt cutters and ground rod drivers

    Arm Sangyo Cutting Tools

    Arm Sangyo Co. Ltd. offers a full line of cutting tools including an electric rebar cutter and electric bolt cutter.

  • Cutting speed of 4 seconds with an output pressure of 11 ton-f
  • 120V and 230V versions
  • Switch lock/release button and trigger switch with auto-return
  • Head turns 180° on the bolt cutter and 360° on the rebar cutter
  • Trigger switch with auto-return
  • Cordless models also available

    Atlas Copco TEX 39H Breaker

    The 71-lb. TEX 39H hydraulic hand-held breaker features a valve system and accumulator design that allows it to handle tough materials and applications.

  • Requires a Class D (EHTMA) power source with a 7.9-gpm hydraulic oil flow and working pressures of 1,520 to 1,810 psi
  • 1,150-bpm impact frequency
  • Designed with fewer parts for simplified repair and reduced operating costs

    Stihl TS 400 Cutquik

    The TS 400 Cutquik is available with either 12- or 14-in. wheel guards.

  • Standard water attachment can be attached to a water hose, pressurized water tank or gravity fed water tank on the cart
  • Filtration system prevents 99% of contaminants from reaching the carburetor
  • IntelliCarb compensating carburetor
  • 4.4-hp, 64cc engine

    Hitachi NR90AD Nailer

    The 3.5-in. clipped head framing nailer weighs only 7 lbs., yet has the power to fasten engineered lumber.

  • Selective Actuation enables switching from sequential to contact fire with the flip of a switch
  • Tool-less depth of drive dial adjusts for flush or countersunk drives

    Fascut Lobster Rebar Cutter

    The Lobster line of hand-held rebar cutters can cut up to #5 (5/8-in. diameter) grade 60 bar in 4 seconds.

  • Weighs 13 lbs.
  • Available in corded 110-volt and cordless, rechargeable 12-volt models
  • Cutter head can be rotated up, down or sideways for cutting in different positions or location

    SealMaster Pavement Maintenance Tools

    SealMaster offers a variety of tools for applying hot or cold crack filling and sealing materials.

  • One-piece, V-shaped squeegee in push or pull design with flexible neoprene squeegee rubber and wooden handle
  • Crackfiller pour pot with stand-up design, fingertip control valve and heavy gauge steel construction
  • Super scrapers and asphalt shovels also available

    Wacker BTS Series Cut-off Saws

    The 12- and 14-in. BTS portable cutoff saws utilize a heavy-duty plastic to reduce weight.

  • Cutting depths of 3.8 to 5 in.
  • 4.7- or 5.6-hp gasoline engines
  • Ergonomic design produces less vibration to the operator
  • Latest