Petrography: What It Can Do

Cracks. Blisters. Spalling. Scaling. Delamination. Low Strength. These are sources of dissatisfaction for owners and aggravation for contractors involved in concrete construction. Because petrography is often used to investigate the causes of these problems, you should have a basic understanding of how petrography works and what its capabilities and limitations are.

 

What is petrography?

Petro means rock; graphic means a pictorial device used for illustration. Put more simply, petrographers can be thought of as “rock-lookers.” Geologists use petrography to understand how rocks form and concrete petrographers apply the principles of petrography to understand how concrete (an artificial rock) got to be in its present condition.

Petrographers do most of their work with microscopes that use reflected light (stereomicroscope), transmitted light (petrographic microscope) and electron beams (scanning electron microscope, SEM) to identify basic components in concrete, study cracks and microcracks, and identify secondary deposits that form when concrete deteriorates, such as gel from alkali-silica reaction. Figures 1 through 3 show examples of images produced from these microscopes. With the SEM, petrographers can even map the chemistry of concrete on a microscopic scale (Figure 4).

Petrographers learn a great deal not only about what is in the concrete but how workmanship and environmental conditions affect performance. A huge advantage petrography has over any other test method is that it allows us to see concrete elements through their thickness, rather than relying only on an exposed surface for information (Figure 5). Petrography can determine if problems are surficial or run deep into the concrete, which is a key to developing repair methods that satisfy the owner’s requirements and preserve the contractor’s profitability. For example, a petrographic examination can demonstrate that a simple grinding treatment will suffice for a repair rather than an expensive overlay or a needless removal and replacement.

The bottom line for the contractor is that if concerns arise and your project is cored for petrography, someone in a lab far away from the jobsite may be looking at your concrete (and potentially criticizing your craftsmanship) at magnifications greater than 1,000x. The following sections give an idea of what this high-powered looking tells petrographers that is useful (and may even be true). Future articles will revisit some of these aspects in more detail.

 

What can concrete petrography do?

Evaluate proportioning. Petrographers typically describe the coarse and fine aggregate, identify cementitious materials such as portland cement, fly ash, slag cement and other supplemental materials, and describe voids associated with air entrainment, entrapped air, bleeding and consolidation. Point counting methods (e.g., ASTM C457) can quantify the proportions of aggregate, paste and air and determine if the parameters of air void systems are suitable for freeze-thaw durability.

Evaluate mixing and consolidation. The distribution of components in the concrete provide important information on mixing and consolidation. Poorly mixed concrete may show sand streaks, low w/cm mortar coatings on aggregates and clustering of air voids. Large voids, honeycombing and gaps around aggregate particles can indicate poor consolidation. Aggregate segregation and loss of air can indicate when and where over-vibration occurred.

Evaluate causes of low strength. Low strengths can result from problems with batching and proportioning, such as excessive air or the presence of fly ash in what is supposed to be a straight cement mix. Retempering and excessive water additions are also common causes of low strength and can be recognized with petrography. Improper sample preparation is another cause of low strength test results and petrographic examinations can detect when this occurs.

Evaluate finishing and curing. Almost anyone can identify the type of finish (hard trowel or broom, for example) with a naked eye, but petrography can unveil much more about finishing operations. For example, petrographers are often able to determine if finishing was timed appropriately by looking at properties of the paste at and just below the finished surface. Inconsistencies in materials can also explain why some loads were more difficult to finish than others. Petrographers can evaluate curing by looking at the degree of hydration at the finished surface and measuring the depth of carbonation. Petrographers can also detect the presence of some curing compounds.

Evaluate cracking. Cracks come in all shapes and sizes. Petrographers can often attribute cracking to mechanisms such as early-age drying shrinkage, plastic shrinkage, thermal cracking and various durability mechanisms. Petrography can also determine the amount of microcracking, which may not be visible in a field survey but can be critical to performance and durability.

Identify durability mechanisms. Petrography is probably the only accepted method to determine many of the cause(s) of concrete deterioration that are related to durability. Petrographers can tell if concrete is deteriorating from freeze-thaw damage, alkali-aggregate reactions, chemical attack, corrosion, and more. Petrographers can help understand issues such as floor covering failures, which can result from moisture migration, durability mechanisms and installation issues. Identifying the extent of these mechanisms is often crucial to understanding why something is cracking, delaminating, or blistering five years after a project was completed (and paid for) and developing an appropriate repair.

Most importantly, know that petrography alone won’t solve all of your problems. Most petrographers never see the actual jobsite and are relying on a small number of cores to evaluate jobs that involve hundreds of yards of concrete. Petrographers need personnel familiar with the jobsite to provide a context for understanding how what is seen under the microscope relates to the bigger picture.

 

David Rothstein, Ph.D, P.G., FACI is principal of DRP Consulting, Inc. (www.drpcinc.com), a firm located in Boulder, Colo., that specializes in petrographic and materials investigations. petro@drpcinc.com

Loading