Made of durable 100% recycled rubber
Available in three sizes: 1-in. to 1.5-in. depths
Designed for easy installation and removal by one person
Screws are driven into asphalt with rotary hammer
Reusable & Various sizes...
Allows you to raise the lid and tilt the lid to match the new road crown
Riser heights start at 1 ½-in. and go up in ¼-in. increments
Edge milling operations remove asphalt 3 to 4 ft. at the curb
Eliminates digging up the frame and re-setting...
Unique Compression Design holds riser in frame All diameters, riser heights, and lid thicknesses available Reduce cost and stream line the adjusting of utilities to the new grade when paving a road Risers start at 1/2 in. rise and go up in 1/8-in...
Rubber adjusting ring Tapered sizes to match crown or slope of road Over 70 sizes to choose from Round, square and rectangular Installed under the utility casting on new construction or rehab of existing utilities Water tight seal not affected...
Removes lids that are 22 to 26 in. in diameter
Collar available for larger diameter lids
Cleans debris from casting seat
Unseats and sets down manhole covers in one smooth motion without any bending required
3 1/2 in. square by 4 1/4 in. in height
Working range of -40° to 450° F
Withstands truck tires and paving machines tracts
Pops-up after being paved over with up to 5 in. of asphalt
Developed from a new recyclable elastomer that adheres to...