Carlson Paving Products Inc., a division of Astec Industries, has been producing asphalt-paver screed technology for more than 25 years. Carlson produces six unique highway-class screed designs in both front- and rear-mount configurations, and a commercial class paver, the CP 100.
The Easy Screed III adapts to highway-class pavers.
Advanced-design heating elements in direct contact with upper surface of main screed plate
Even, controllable heat
Front taper design for uniform distribution
Adjustable slide track supports...
The WP-810 Windrow Pick-Up Machine is designed to couple to the front of an asphalt paver to transfer hot mix asphalt from windrows in the paving track to the paver hopper using an elevating conveyor.
HMA reblending occurs during pick up and...
As National Pavement Expo continues to show renewed growth while the construction economy slowly rebounds, Cygnus Business Media announced that next year it will shift the hours of its trade show to highlight the exhibit floor and give contractors an...
The Vibratory Beveled Notch Edger is available in 12 or 18 in. with a flat, bolt-on design.
Can also be used as a full-depth safety edge bevel, berm compactor and for compacted Michigan safety joints
Works on the left or right side of the screed
Improves longitudinal joint quality by reducing thermal segregation
Reduces shadowing, tearing and scabbing of joint interface
500 degree end gate runner preheats adjacent mat and forces more material into joint interface to increase joint lifecycle...
Helps maintain uniform head of material at any width
Reduces load forces against screed limiting depth changes due to head of material inconsistencies
Protects tracks and tires from overheating causing delaminating of rubber compounds
Bevel using heat and extruding material for higher density
Applied bevel will not deform under compaction process
Bevel rotates from 90 degrees for matching joints to 30 degrees for applying the safety bevel
Spring loaded so won't interfere with...