Caterpillar Paving Products, a division of Caterpillar, Inc, is an industry leader providing world-class equipment and training for the paving industry. Serving customers through its global Cat dealer network, Cat paving equipment, parts and service are available from more dealer locations worldwide than any other paving equipment manufacturer.
The RM-300 is capable of both full depth reclamation and soil stabilization.
Cat C11 engine with ACERT Technology
Optional attachments, such as a sliding operator's station, pressurized cab, automatic depth control, four mode steering, rear...
Weiler's W730A Road Widener offers a large hopper capacity and high-production conveyor to keep material flowing.
3.5-cu.-yd. hopper capacity
Working speeds of 350 fpm and widths of 14 ft.; can work 12 in. above or below grade
174-hp Cat C6.6...
Weiler's line of split-drum static rollers are engineered to perform in both confined and high-production working environments.
C307 offers 202 lbs/linear inch pressure when including its base weight and water in drums and tanks; C310 offers 249...
Weiler's E2850 Remixing Transfer Vehicle (RTV) is designed to help improve smoothness and handle large volumes on high-production paving jobs.
300-hp Cat C9 engine with Acert Technology
Working speeds up to 194 fpm
Weiler's E550A windrow elevator is designed for high-production, mainline paving.
60-in. wide throat
Slats are 58 in. wide and 7 in. deep to provide easy entry from the windrow
Wing width can be extended from 102 to 124 in.
Caterpillar's CB/CC34 vibratory utility compactors provide a compaction width of 51 in. while the CB34 XW provides a 55 in. compaction width.
CC34 uses a front steel drum and four pneumatic tires on the rear
46-hp Caterpillar C2.2 water-cooled...
The CW34 is an eight-wheel roller with an operating range from 10 to 27 metric tons.
Designed for granular materials as well as all types of asphalt mix designs and can be used on all phases of compaction due to its high contact pressures...
The CW14 is a standard nine wheel pneumatic roller with an option to increase to 11 wheels
Operating weight range of 10,770 to 38,000 lbs.
Cat C3.4B engine meets Tier IV Interim emission standards
Designed for granular materials as well as...
The PM102 is designed for small-to-medium jobsites and features a front folding conveyor with hydraulic control, load control, a traction control device, two propel speeds, a rotor with quick release conical tool-holders, a flush-cutting feature and...
The Cat Grade and Slope for cold planers is a 2D grade and slope solution featuring easy use, robust components, high accuracy and exceptional reliability.
Designed for interfacing with sonic sensors, contact sensors, wire rope sensors and slope...
The Cat Grade and Slope System is a two-dimensional (2D) system that helps remove irregularities from the surface and control mat thickness.
Can be equipped with single or dual LCD displays
Text-based menus offer multiple language options that...
Caterpillar's PM 201 features a 650-hp Cat C18 engine with ACERT technology.
83-inch rotor width
12-inch rotor depth
41,310-pound operating weight
Load Sensing Propel System
Choice of three rotor designs
High capacity, versatile conveyor
The AP555E has an operating weight of 35,290 lbs. when equipped with the AS2252C screed, or 35,810 lbs. with the AS3251C screed.
142-hp C4.4 4-cylinder, turbocharged diesel engine with ACERT Technology
Automatic speed control and three...
Caterpillar adds the CB14B utility roller to the Paving Products machine family.
Dual driving drums with 35- and 39-in. widths
Dual drum-drive powertrain provides continuous full-drum traction on soft base materials, uneven surfaces, and steeper...
Construction unemployment decreases and outlooks increase, Caterpillar Paving and Weiler join forces, Toro acquires Stone Construction Equipment, and much more on the May 17, 2012 edition of Construction News Tracker
The PM200 half-lane milling machine offers an optional 88-in. cutting rotor in addition to the standard 79-in. rotor.
66,359-pound operating weight or 69,445 pounds with optional rotor package
Quick-release conical tool holders