HDE manufactures patented infrared heating equipment for asphalt construction and repair including infrared patchers for hot in place recycling, longitudinal joint heaters, infrared asphalt recyclers and hot boxes. The particular design ensures maximum operating efficiency with maximum production capacity and simplicity of operation with low service requirements. The equipment features patented replaceable heater cartridges that can be replaced in 20 minutes and costs less than 10 cents per square foot per hour of operation. Propane consumption cost is less than 25 cents per hour per square foot.
No open flame
No cold spots
Up to 18 separate heat zones
Up to 94 s.f. Heating panel
2,3,4,6 ton asphalt reclaimer
Eliminate tank freeze ups
No batteries or blowers
Fuel consumptions : $0.25 square...
Using HDE 12' x 6' ( 1,050,000 Million BTU ) Infrared Heater PRI is able to reheat and rework a 72 square foot area every 15-20 using only 3-100 pound propane tanks per day.
For more information, please visit www.asphaltheater.com
Heat up and soften a localized area of the surface course asphalt so that it can be re-worked and compacted to eliminate the surface deterioration
Soften the asphalt to original mixing temperatures in 5 to 10 minutes
Makes repair of an asphalt surface...
Heat Design Equipment's Longitudinal Joint Heater is available in a 12-foot, 300,000 BTU unit as well as a 16-foot, 400,000 BTU unit.
Two attachment points
Can attach to any brand of paver within 10 minutes
Pre-wired for electronic ignition and...
The MR75 asphalt recycler is designed for hot mix pothole repair. Asphalt chunks are loaded under the infrared heater to be softened enough to fall to the storage area below. The asphalt in the 3/4-ton storage area can load right into the pothole. The...
The HDE 1000 IR is an infrared maintenance truck that offers Hi/Low fire capacity on infrared emissions, heat penetration without surface burning, and operates on liquid propane. The 8 x 6 heater operates on 3- to 100-lb. liquid tanks and is hydraulically...
aggregate/RAP pre-heating system
Ray-Tech has recently developed an infrared heating system specifically for heating and drying aggregate and RAP.
Composed of multiple heating units, which are designed to be placed over a conveyor belt in...
The rubber-tire roller heater from Heat Design Equipment is a high intensity infrared heater designed to heat the tires without burning. Infrared sensor to turn heaters off when they have reached the desired temperature Ideal for use in cold...