llinois Tool Works Inc. is a diversified manufacturing company with nearly 100 years of history delivering specialized expertise, innovative thinking and value-added products to meet critical customer needs in a variety of industries.
ITW Brands was formed in 1992 to meet the growing demand from consumers and remodeling contractors for high-quality home improvement and do-it-yourselfer construction products. ITW Brands' products are used and trusted by industry professionals. Our top-quality tools and fasteners include: Tapcon, E-Z Ancor, Red Head, Ramset, Teks, Rock-On, Backer-On and Tornado.
ITW Commercial Construction, North America will feature two newer products at World of Concrete that save a significant amount of time and are more efficient than others in their respective categories. The Ramset-I-F Insulation System and the new...
From ITW Buildex, Sammys threaded rod anchors.
Installs into a wide range of substrates
Can accommodate installation vertically, horizontally, or at an angle up to 90-degrees
The concrete Sammys requires pre-drilling and offers Advanced...
Made of plated carbon steel or stainless steel, Trubolt+ Wedge anchors consist of a high-strength threaded stud body, expansion clip, nut and washer and are designed to resist static, wind and seismic tension as well as shear loads for anchoring in...
ITW Commercial Construction's anchor calculation software allows architects and engineers to design concrete anchoring connection within minutes to create anchor connections in accordance with ACI 318 Appendix D.
Select the number of anchor...
The fast curing Epcon S7 Hybrid Epoxy Adhesive for cracked concrete and seismic applications can be used in submerged and water filled holes as well as saturated and dry conditions.
Designed for adhering threaded road and reinforcing bar into...
Designed for cracked concrete and seismic approved, the ITW anchor trio of the Swivel Head, Sidewinder and Vertical anchors enable more consistent alignments that mirror design specifications regardless of overhead angles, walls or similar installment...
ITW Red Head's Epcon C6+ epoxy concrete adhesive is said to have a 35% higher average bond strength compared to its competition in 70°F cracked concrete.
Improved dispensing capability
Installs even when concrete is wet
Available in 10 and 20...
ITW offers three Large Diameter Tapcon Concrete Screw Anchors that can be used to anchor in concrete, block and brick. Their Advanced Threadform Technology translates into 30% lower installation torque and 20% more holding power.
ITW Red Head now offers a 316 Stainless Steel Trubolt+. The three available diameters, 3/8-in., 1/2-in. and 5/8-in. (in various lengths), cover a wide range of applications. This wedge anchor offers a high corrosion resistance.
The epoxy resin and hardener are completely mixed as they are dispensed from the dual cartridge through a static mixing nozzle, directly into the anchor hole
G5 can be used with threaded rod or rebar
Virtually odorless, can be used indoors
Shoulder prevents over drilling
Less likely to hit reinforcing steel or post-tension cable in concrete
No lost time or energy drilling farther than necessary
Anchor is set at a specified depth, does not drop too far into hole
For use with RX...
Drop-in, shell-type anchors specified for anchorage in concrete
Internally threaded, all-steel shell with expansion cone insert and flush embedment lip
Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI...
For concrete and masonry fastening
Finished hex head
Solid and hollow base material
Applications include industrial doors, storage racking, signs, security shutters, gate & fence posts, spiral staircase and hand rail
Reusable with the coil replacement anchors
High shear strength
Ideal for forming and tilt-wall contractors
Applications include load bearing angles, beams and columns, machinery holddown, Jersey barrier, glare screens and light...
The hardener and resin are completely mixed as they are dispensed from the dual cartridge through a static mixing nozzle
The pre-mixed adhesive is injected directly into the anchor hole
an be used with threaded rod or rebar
1 hour cure time...
The acrylic resin and hardening agent are completely mixed as they are simultaneously dispensed from the dual cartridge through a static mixing nozzle, directly into the anchor hole
Can be used with threaded rod or rebar
All weather formula
2003 and 2006 IBC compliant for cracked and uncracked concrete
Anchor diameter equals hole diameter
Fully threaded design eliminates subsurface obstruction problems and accommodates various material thicknesses at the same embedment...
ITW now offers its Advanced Threadform Technology on the company's line of Tapcon anchors.
Patented sawtooth design provides up to a 30 percent reduction in installation torque
Thread pattern cuts its own grooves into concrete and optimizes...