The Max GS732C Cordless Concrete/Steel Pinner drives concrete/steel pins in lengths of 1/2 to 1-1/4 in. According to Max USA, the GS732 has a pivot swing trigger with 50 to 70% lower pull-load than competitive models.
Tool magazine accepts both...
The 16.8-lb. PJRC160 cordless rebar cutting tool provides a cordless option for cutting up to #5 rebar.
Powered by a 25.2-volt lithium ion battery
Makes 176 #5 Grade 70 cuts per charge
360° rotating head to easily align with the cutting area...
The RB517 Rebar Tying Tool will perform 1,800 ties per charge, a 400% increase over the previous model.
Capable of tying rebar from #5 x #5 up to #7 x #8
14.4-volt lithium-ion battery
Automatic shut-off when tool not in use...
Max USA's 16 Ga. NF565/16 will shoot 16 Ga. finish nails from 1 1/4- to 2 1/2-in. in length.
Weighs 3.5 lbs.
Dial adjustable depth control
No mar contact tip
Easy jam clearance
Easy twist air deflector
Switchable fire mechanism to go from...
The NF235F/18 will shoot 18 Ga. brads from 5/8 to 1 3/8 in. in length. The NF255F/18 will shoot 18 Ga. brads from 5/8 to 2 1/8 in. in length. Both tools feature a dial adjustable depth control, nail indicator on the magazine, no mar contact tip, easy...
Model GS865E shoots concrete pins from 1/2 to 2 9/16 in. in length
Holds 40 pins
Sequential trip trigger
Reversible belt hook
Safety lock out mechanism
Includes battery and charger and an optional 12V car adaptor for the charger
The RB515 Rebar Tying Tool from Max USA is designed for tying large size rebar, from #5 x #5 up to #8 x #7 rebar. An adjustment dial allows you to select either three or four wraps per tie, and the tool cuts and twists in one second. The RB515 weighs only...
The 400-psi AKHL1050E Power Lite compressor is powered by a 2-hp DC brushless motor with inverter circuit that adjusts the rpm for maximum performance depending on the voltage level. Weighs only 51.7 lbs. and operates at less than 70 dB Triple fan...
Max USA SuperFramer SN883CH/34 Selective trigger system allows tool to be contact or single fired with no adjustments Open nose for easy jam clearance Dial adjustable depth control Pointy teeth on contact Maintenance-free end cap filter...
The 6.4-lb. HN120 pneumatic concrete pinner is powered by a 400-psi High Pressure Pneumatic System, enabling it to drive .300-in. head pins into concrete. Magazine holds 50 pins and shoots pins from 1 to 2 1/2 in. in length Attachment parts available...