The MAXAMizer Heat Recovery System from Maxam provides an increase in production and a decrease in fuel costs.
Stack temperature automatically maintained at target set point
Excess heat that normally escapes the stack goes right into the material...
The eco-friendly warm mix foaming system from Maxam is easy to install and does not require organic or chemical additives.
Simple controls, no moving parts in foaming gun and heated enclosure for cold weather operation
Automatic air purge clears...
Maxam's electric fuel heater is available up to 150 Kw and comes on a 4' x 5' skid.
Instant-on heat for fast startups
Fully modulating solid state controls draw only the minimum power required for the work being done
Unique water/oil system uses...
Maxam's Recycle Systems are available for drum and batch plants.
Skid-mount RAP bin designed to eliminate plugging or no-flow conditions
1/4-inch-thick AR bin walls standard
Dual roll breaker reduces RAP with high-speed self-relieving revolving...
Maxam's cold feed systems feature heavy-duty idlers sealed for life.
Oversized drives with heavy-duty shaft mount gear reducers
Top and bottom bin stiffeners
Bin constructed from 1/4-inch-thick plate with self-relieving discharge opening...
Maxam's drag slat conveyors are available in 200- to 800-tph capacities.
Heavy-duty dual or single roller chain
3,000,000-ton chrome carbide wear plate
1,000,000- to 2,000,000-ton chain
Dual stairways standard
Adjustable and sliding idler...
Maxam's baghouses are available as stationary, portable or transportable.
Pulse jet cleaning
Heated valves and compressed air header
Laser cut tubesheet
800-degreeF interior paint
Lightweight top doors
Tool-less entry and...
Maxam's silos offers 100- to 300-ton capacities.
One- to 6-bin configuration
Dual clam gate electrically heated and insulated for maximum heat retention
Wear-resistant lined reinforced cone
Fully insulated and electric- or oil-heat optional...
Maxam Equipment's Asphalt Unloading Pump Unit features a high-performance gear pump with relief valve.
15-hp TEFC 3 PH/460V motor
Over-sized oil heated single basket strainer
Mounted on heavy-duty steel skid base
The Maxam Anti-Strip Metering System is designed to pumps difficult, highly viscous compounds at normal ambient temperature conditions without tank heat.
In-line heater for efficient viscosity control
Direct feed from totes or optional storage...
Maxam's flat plate heater exchanger requires less thermal oil flow than any other system.
Pre-heats in moments for fast startups
Provides 150-degree fuel temperature increase
Mounts on heavy-duty space-saving steel skid
Modulating thermal oil...
Maxam's new Optima batch plant features all moving components on the outside of the tower for reduced wear and ease of maintenance. Available in 4-, 5- and 6-ton batch sizes 100 to 250 tons of hot storage
Maxam's self-aligning trunnion system is designed to extend the life of tires, trunnion rollers and bearings.
Each trunnion uses a high-load-capacity ball joint which allows the trunnion to align itself to the tire
Wear is minimized and always...
Maxam's Raptor recycle entry system runs up to 50% RAP without superheating or blue smoke.
Standard on all Maxam drums; retrofits to any counterflow drums or batch plant dryers
RAP is heated in the drum by the direct heat of the flame
Astec Inc., a member of the Astec Industries Inc. family of companies, is a world leader in Hot Mix Asphalt (HMA) equipment technology, support and training and the only North American manufacturer to offer a complete line of portable, relocatable and...
Reliable Asphalt Products is the hotmix industry's most comprehensive asphalt plant equipment supplier. We provide new, used, and reconditioned capital equipment, parts and components, field service and painting, as well as break-down and emergency...