Plastbau Technology floor and roof system
EPS panels are supported and reinforced with two integral steel beams molded in the product from end to end for self-supporting joist and deck forming system
Thicknesses between 7 in. and 13.5 in.
Combines the 2 1/4-in. Regular Panel on the interior and the 4 1/4-in. Plus Panel on the exterior, shifting the wall's thermal center closer to the structure's interior
Design elements can be created on-site using four main components
Quad-Lock ICF System
EPS panels available in widths of 21/4- and 41/4-in.
Five standard wall widths available, 4 to 12 in. wide
Corner and angle brackets to eliminate structural bracing at corners
Assemble on site