The new Vögele Super 1300-3i offers a basic width of no more than 6 ft. 1 in. with its hopper wings folded.
Length of just 16 ft. 3 in.
Paving widths from 2 ft. 6 in. to 13 ft. 9 in.
Tier 4i emissions-compliant...
A large cold mill with a hydraulically driven milling drum that’s movable from side-to-side is at the heart of the new Wirtgen W 200 Hi.
Hydraulically driven milling drum assembly can be displaced 15.75 in. to the right or the left, providing...
The HT22 quick-change toolholder system is designed to increase the service life of the milling drum.
S ignificantly enlarged contact areas between upper and lower parts
High cutting forces are reliably transferred to the...
Wirtgen's W 250i cold milling machine is designed for removal of carriageway pavements at full depth in one pass.
Fuel-saving drive concept with two diesel engines
991-hp Tier 4 Interim engine
Dual Engine Concept: full power of two engines...
The W 60i rear-loading cold mill can be used for removing pavement strips or trenches, milling around manhole covers and detail work left behind by big mills.
Cuts 24 in. wide and 12 in. deep
215-hp Deutz six-cylinder, Tier 4i engine
The 8-ft. Vision Series pavers from Vögele America Inc. include the 5100-2 tracked and 5103-2 wheeled units and allow contractors to tackle both highway and commercial paving.
Standard E-Z IV screed
Large fuel tank capacities
The WR 240i stabilizes large areas of incohesive soils utilizing any stabilizing medium, and recycles 100% of existing asphalt pavements in situ.
Working width of 7 feet 10 inches and maximum working depth of 20 inches