Griffin Pump and Equipment has over 75 years experience in manufacturing innovative equipment that is a direct result of field experience. Griffin Pumps provide the highest air-handling capacity on standard units in the market and are uniquely designed to address the needs encountered in dewatering, bypass, open pumping and hydraulic submersible pump applications. Griffin units are designed to give long, trouble-free service and perform continuously for extended periods with minimal attention and maintenance.
Vacuum-assisted wellpoint pumps are available in 4-, 6-, 8- and 10-in. models.
Automatically prime and reprime at suction lifts of 25 ft. or greater
Capable of handling flow up to 3,500 gpm, head conditions up to 150 ft. and over 200 cfm of air...
Griffin offers a variety of silent, non-clog, high head and flow, trash-handling pumps with capacities up to over 20,000 gpm.
Large cleanout ports allow removal of debris from the impeller without removing suction hose or suction piping...
Renting a pump to a customer can be a simple matter of determining the right type and correct size of machine. In other situations, however, it takes a deeper understanding of science to make the right recommendation.
Griffin provides PolyTank designs and plastic storage tanks produced by extruding polypropylene or polyethylene around a drum.
Approach gives the ability to design and build tanks to meet customers' specific needs
Design process takes into...
After sewage started seeping above ground last
April, the Albuquerque Bernalillo County Water Utility
Authority realized it needed to fix nearly 1,500 feet
of dilapidated sewer system, which might take up to
eight weeks to repair. There to...
The Wellpoint Pipe Puller grabs the inside of the pipe wall below the threaded section or joint of PVC pipe, making the removal of installed wellpoint a quick, simple and safe job.
Quick upward thrust releases the puller for the next wellpoint...
Griffin offers accessories to complete any wellpoint system.
Wellpoints available with 1.5- or 2-in. PVC or stainless steel screen
Swingjoints constructed of flexible reinforced hose with a clear elbow
Valve allows the wellpoint to be tuned...
The electric-driven Model 6WPRE is a fully automatic, dry priming and dry running, self-contained, portable dewatering pump capable of handling large volumes of air and water. The unit operates efficiently under intermittent flow conditions, and...
Pumps feature a non-clog impeller capable of handling
stringy materials and solids up to 4 1/2 inches and a large
clean out port for hassle-free removal of large debris over
4 1/2 inches without removing suction pipe or hose.
These fully self-priming, stainless steel electric submersible pumps meet the demands of applications requiring corrosion resistance and durability. Flows from a few to several hundred gallons per minute, with head conditions to several hundred...
The Model 18NCRD non-clog, self-contained, portable pump features a non-clog impeller capable of handling stringy materials and solids up to 4 1/2 in.
17,000-gpm maximum capacity and maximum head up to 125 ft.
Fully automatic, dry priming and...