Hobart's 610 stick electrode features a concentric design for an even coating along the entire length and consistent arc performance for pipe welding, construction and shipbuilding, maintenance welding and general-purpose fabrication.
Can be used in...
Miron Construction contractors see increased deposition rates with continuously fed wire and increased productivity with two to three times increased travel speeds using flux cored welding units during the Lambeau Field renovation project.
Hobart Brothers will showcase stick electrodes and tubular wires designed for structural and construction equipment applications.
McKay hardsurfacing filler metals provide weld deposits that meet or exceed manufacturers' specifications for...
Family of self-shielded and gas-shielded hard surfacing wires
Specially designed alloys for a range of impact and abrasive wear applications
Options available for build-up and/or overlay to restros and protect equipment
Consistent products with...
Family of fas-shielded hard surfacing wires
Designed for build-up and overlay to restore and protect equipment surfaces
Excellent operator appeal in all positions
Offers a range of impact and abrasion resistance
Useable with 100% Carbon Dioxide or...
Vantage metal-cored welding wire
Offers clean weld beads with minimum silicon islands to reduce costly cleanup
Offers low spatter levels to save time prior to painting or plating
Features good wetting action and gap bridging to improve weld...
The P-PAK re-sealable plastic packaging is designed to block moisture that can lead to damage of mild steel stick electrodes.
Available with 3/32, 1/8 or 5/32 diameter electrodes
5- or 10-lb. P-PAKs available for five AWS classifications of stick...
Hobart Tri-Mark TM-101 Flux Cored Wire
The Tri-Mark TM-101 gas-shielded flux cored wire is designed for A514, A710 and similar HSLA and Q'T high-strength steels.
Combines low temperature impact toughness with tensile strengths in the 105,000- to...