Winter Equipment Company's runners are designed to fit Caterpillar's RM 350 and RM500 road reclaimers.
Hard facing weld technology
1/2-in. front and rear angle plate are heated with double thickness
Designed for use with excavators ranging in size from 4 to 80 tons, the ripper penetrates and scores tough, hard and frozen ground.
Standard replaceable tooth and wear shroud, reinforcing gussets and side wear protection plates
The 100,000-ft.-lb. CXL140 impact hydraulic piling hammer is especially developed for civil engineering contractors working in the North American construction market.
Total weight of just 32,000 lbs. with a power output of 103,000 ft.-Ibs via an...
Designed for excavators in the 30- to 80-ton range, the 7-ft. 7-in. high XD500 anchor drive can be used to screw piles into the ground.
370,000 ft./lbs. of rotational torque
I-Drive hydraulic motor system uses total available horsepower of...
McLaughlin's mini core drill attachment can be used with its 500-, 800- and 1,200-gal. vacuum excavators for cutting holes at 6-, 8- and 10-in. diameters in concrete or asphalt.
Integrated cutting tool
Vacuum suction base uses sealing gasket between...
The Multi-Ripper features a staggered shank on an arc design that allows the excavator to rip through rock, coral or frozen ground.
Rips the sides and bottom of the trench flat with no depth limitations.
Supplied with MTG KingMet teeth
Can be used...
The Micro CPA drilling attachments can be used on a variety of carriers for pipeline trenching, utility work, tiebacks, reinforcement and long-reach applications.
Available for compact excavators, backhoe-loaders and skid-steer loaders ranging...
The MTM Multi Task Medium Construction series soil stabilizer-stone crusher-asphalt shredder is designed for tractors between 240 and 360 hp.
Variable shredding chamber
Up to 10.2-in. depth
Adjustable shifting rotor variates volume of the...
The rebar bender attachment comes with five mandrels that provide the ability to bend rebar into a variety of angles and repeat bends for added consistency and efficiency.
Bend rebar up to a #6 grade up to 200 degrees
Remote attachment control for...
The Extendavator is available in lengths from 4 to 50 ft. in six weight classes. Possible to achieve over 100 ft. of ground reach on a 250,000-lb. machine Allows use of buckets, hammers, grapples and universal processors without additional...
The Add-A-Stick is available for installation on hydraulic excavators in the 30,000- to 500,000-lb. class.
Lengths from 8 to 26 ft.
Custom designed to meet specific application
Small excavators can be transported with the stick installed
The completely pneumatic Model 210 Twin Vertical concrete drill attachment utilizes CP 69 rock drills and is capable of drilling a 3/4- to 2 1/2-in.-diameter hole a maximum of 17 in. deep.
Attaches to most skid steers or wheel loaders
The HCM Skid Steer series is manufactured with a universal skid-steer mounting plate, which allows the drill tools to be attached to almost any skid steer. It can be attached or detached in less than five minutes. The drill uses 5-ft. drill pipes or...
The Multi-Ripper is constructed with thick, tough AR400 steel, and is available to fit any skid-steer loader above 45 hp equipped with an SAE standard quick coupler.
Effective for ripping rock, frost, asphalt, hard packed surfaces or stumps...
The 4000 vibratory ripper is a direct pin-on attachment with engineered mounts for most makes and models of dozers up to 200,000 lbs.
Designed to work in applications in compacted soil, shale, limestone rock and coal
Aftermarket Skid Steer enclosures add comfort and value to your machines with all-weather protection.
Include safety glass in the door, electric wipers and choice of hard or soft sides
Available for many different makes, both new and old
This equipment-mounted, pneumatic concrete drill attachment series includes the three-gang Model 210-3 EQ MT, four-gang Model 210-4 EQ MT and five-gang Model 210-5 EQ MT.
Compatible with most models of backhoes and excavators
The MME series is available using the TE260 hydraulic drifter or the RDS250 hydraulic rotary head.
5-ton minimum excavator size
Hole sizes from 1.375 to 4 in.
1,080-lb. approximate drill tool weight
Feature radio controls, 360° positioning...