The handheld, triple-head scabbling hammers reduce texture and roughen concrete, remove laitance and expose aggregate for application of sealants and coatings.
Single-piece pistons yield 8,400 bpm
Integrated back handle grip
Consumes 16 cfm at...
The Max GS732C Cordless Concrete/Steel Pinner drives concrete/steel pins in lengths of 1/2 to 1-1/4 in. According to Max USA, the GS732 has a pivot swing trigger with 50 to 70% lower pull-load than competitive models.
Tool magazine accepts both...
Hilti designed its two new cordless rotary hammer drills — the TE 2-A18 Compact and TE 2-A18 — to perform at or above that of a corded tool.
Lighter than their corded counterparts
Use to drill anchor holes or through holes in...
The Pervious Joint Cutter is used to roll control joints in pervious concrete.
The standard size is a 3 ft. wide roller and a 1 3/4 in. depth on the roller blade with a ½ inch radius
Contains machined tapered ends to eliminate roller marks...
Clean holes drilled in concrete or masonry in preparation for epoxy anchors with the Flash Vortex Brush.
Consistent thorough cleaning of dry and wet drilled holes
Does both brushing and blowing processes
Available in 5/8-, 3/4-, 1-, 1.25- and...
The Panther Claw HSP-12 is designed for the concrete construction industry and uses a 12-in. power screw instead of a lever for stake pulling.
Capable of over 2,000 lbs. of lift depending on drill's output torque
Quick Thread Release technology...
Nox-Crete's Perfect Form and Concrete Sprayer is a contractor grade hand pump sprayer to uniformly apply form release agents, cures, sealers and bondbreakers.
3-gal. stainless steel tank
Large capacity, 100-mesh filter in the trigger valve to...
The 7-in. Wide Fresno allows users to finish concrete close to walls and obstructions without bracket interference.
Blade features radius rounded ends
Wider working surface prevents marking and gouging
Made of tempered flexible blue steel