AIRMATIC has been named Northeastern Stocking Distributor for KODI KLIP Rebar Fastening System. The KODI System produces safe, stable rebar connections at low cost. KLIPPER GUN's pneumatically attach, non-corrosive and features a 4-point grip. K-Klips can...
Manage your listing
Companies are invited to add or update their listing within the ForConstructionPros.com Buyers Guide! If you are unable to access, please call Kimberly Hegeman at 800-547-7377 ext. 1374.
For advertising information, please call Sean Dunphy at 800-547-7377 ext. 1504.
Forta-Ferro is a synthetic macro fiber reinforcement used to reduce plastic and hardened concrete shrinkage, improve impact strength, and increase fatigue resistance and concrete toughness.
Designed to mix and finish well, even at high dosages
Cleaner, Degreaser and Etcher is a surface preparation treatment for use prior to repairing, sealing or staining concrete, paver and masonry surfaces.
Degreases, cleans stains and oil, and etches surface
Significantly improves adhesion of coatings...
The Pure110+ epoxy adhesive anchoring system has the same bond strength at 110° F as it does at room temperature and is now ICC-ES approved in both cracked and un-cracked concrete.
ICC-ES approval includes all diameters and sizes that appear in the...
The rebar bender attachment comes with five mandrels that provide the ability to bend rebar into a variety of angles and repeat bends for added consistency and efficiency.
Bend rebar up to a #6 grade up to 200 degrees
Remote attachment control for...
The 16.8-lb. PJRC160 cordless rebar cutting tool provides a cordless option for cutting up to #5 rebar.
Powered by a 25.2-volt lithium ion battery
Makes 176 #5 Grade 70 cuts per charge
360° rotating head to easily align with the cutting area...
MMFX2 is the approved by AASHTO and ICC for use of Grade 100 rebar and provides up to twice the strength of conventional steel while maintaining ductility.
Unique steel microstructure results in five times more corrosion-resistance than conventional...
The Benders and Cutters rotate 360° for cast-in-place rebar fabrication.
Powered by 10,000 psi hydraulic pumps
Designed for one-hand operation
Bend or straighten rebar up to 135°
Bending and cutting capacities for #6 or #8 60-grade rebar
The OSHA Rebar Safety Caps are CA OSHA approved to protect employees and equipment from exposed rebar, pipe and anchor bolts.
Made from polypropylene LLPE blend in safety orange color for high visibility
Fit #3 - #8 rebar
For use where the...
The model FR-800-C combines a rotary bender with a heavy-duty shear to cut and bend up to and including #8 (1-in. diameter) rebar.
Fabricate stirrups, hooks and 3-D bends and cut bars to length
Plugs into a standard 110-volt outlet
Can be used...
King-Hughes introduces the 515DG50 hog ring and ringer tool designed for the installation of steel mesh. Rings are galvanized to eliminate premature rusting Made of high strength 15-gauge wire Lightweight tool allows easy operation Eliminates...
The Cutting Edge Saw from Benner-Nawman cuts rebar, all-thread rod, coil rod, EMT conduit, pipe and more.
Cuts material flush with the surface, while a flush-cutting blade guard reduces blade exposure
Three-position, removable side handle and a...
The locking head design on the GripRite PROLOK Tilt-Up Chair for rebar and mesh reduces ties and prep time by approximately 50 percent.
EZ Flow base allows concrete to flow smoothly through the panel’s reinforcing grid
Four-point base leaves an...
The RB517 Rebar Tying Tool will perform 1,800 ties per charge, a 400% increase over the previous model.
Capable of tying rebar from #5 x #5 up to #7 x #8
14.4-volt lithium-ion battery
Automatic shut-off when tool not in use...
Multiquip rebar equipment offers contractors safe and efficient methods to cut or bend rebar on job sites.
MB25A rebar bender is capable of bending up to 1-in., grade 60, diameter bar, 180°, includes a full set of rollers and collars to...
The #6 Pull Bender bends or straightens #3, #4, #5 and #6 (3/8 through 3/4 in.) rebar.
Weighs 17 lbs.; 17 in. in length
Bender head rotates 360°
Can be set in a horizontal position for repetitive/production bending or in a vertical position for...
Battery powered cutting tool
Designed to cut the toughest steel
Can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters
Cut wire rope up to 5/8 in., rebar (Sc 40) up to...
Positive reinforcing steel positioning device used to control concrete coverage and steel location in concrete walls designed with two mats of reinforcing
Manufactured to project specifications regarding minimum coverage, steel size, orientation of...
Viper-Lok allows for various sized pieces of rebar to be connected together vertically and horizontally.
Eliminates tying rebar
Accepts #3 through #7 rebar in any combination
Acts as a standoff from the inner core or floor
Available in 2-in...