Level Top SP is a self-leveling concrete overlay that can be integrally colored or stained and is polishable.
For use on new or worn concrete
Walkable/stainable in 4 hours; polishable in 24 hours
Dries to a light gray finish
The Ligno-Tec RH Kit can be used to take in-depth moisture measurements before the installation of floor coverings or in repair applications.
Evaluate moisture in concrete using the in-situ probe method
A relative humidity sensor is embedded into...
EucoFloor 24 is a single-component, cement-based, semi-self-leveling mortar that provides a new wear surface.
Install over existing, properly prepared concrete substrates
Can be placed and left in its natural state for a smooth, concrete finish...
PermaCrete can be applied over concrete, masonry, aggregate, foam and steel in vertical and horizontal applications to provide an architectural surface with twice the strength of standard concrete.
Acrylic polymer cement compounds of over 6,000 psi...
McKrete is an acrylic and epoxy cementious overlay material that can bring new life to an existing concrete surface.
Accepts stencil patterns and colors
Apply at 1/8-in. and up
Residential or commercial — pool decks, driveways, patios, hotel...
DuraFloor is the latest offering in the FGS PermaShine Concrete Polishing System.
Cement-based, polymer-reinforced polishable overlay mortar designed to cover up unsightly concrete and level a surface
Allows vehicle traffic or mechanical polishing...
This primer designed for the Rapid Set TRU overlay system ensures strong adhesion between the substrate and the topping while sealing porous concrete to prevent pinholes and bubbles.
Can be used on moist or dry surfaces
Microtopping for interior or exterior applications
Can be used on vertical projects with proper surface preparation
Contractors can integrally color the product using Terra Fresco Color Paks, available in 13 colors
Topping also accepts stains and...
The Concrete Solutions Trowel–Top is a “just add water,” polymer modified cementious overlay material designed for thin, smooth resurfacing of floors, walls and countertops.
Apply from 0 to 1/16-in. thick
Bonds to concrete and other surfaces...