The Bandit Model 2550 Track stump grinder features a bandit-designed drive system that utilizes rubber tracks while providing low ground pressure.
44-hp diesel engine
20-in. diameter Revolution cutter wheel
Standard swing out operator's...
Manage your listing
Companies are invited to add or update their listing within the ForConstructionPros.com Buyers Guide! If you are unable to access, please call Kimberly Hegeman at 800-547-7377 ext. 1374.
For advertising information, please call Sean Dunphy at 800-547-7377 ext. 1504.
The RG27 and RG35 are part of Rayco's Super Jr stump cutter line. The compact, self-propelled cutters feature a newly designed pivot allowing bigger cutting dimensions and less maintenance.
Wider tires for more floatation and traction
The STX-38 stump grinder features Toro's Inteli-Sweep to automatically adjust the speed of the wheel when sweeping across a stump.
4.5 mph travel speed
Full hydraulic operation
22.25-in. diameter cutting wheel
38-hp Kohler air-cooled gas...
The SC30TX stump cutter features a dependable electronic fuel injection (EFI) gas engine that performs well during cold-weather starts, reducing occurrence of engine flooding over comparable carbureted gas engines.
The self-propelled Model 2550XP beltless hydrostatic direct-drive stump grinder is available with 35- or 38-hp gasoline engines or Kubota diesels with 35 or 44 hp.
Hydrostatic motor directly powers the cutter wheel
50-in. swing arc
Cuts to a...
The Super Jr line of compact, self-propelled stump cutters are now available with 3-position swing-out operator control stations to allow better visibility of the cutting action and easier travel through gates.
The swing-out control is of particular...
The Trac Jr is a compact stump cutter with go-anywhere traction and flotation that only tracks can provide.
Rubber tracks provide traction and ground pressure of less than 4 psi
Huge, 47.5-in. cutting width tackles big stumps...
The SC372 stump cutter is powered by either a 37.8 hp diesel or 35 hp gasoline engine. Optional AutoSweep monitoring system and a combination belt and gearbox direct drive system offers efficient transfer of horsepower from the engine to the cutter...
Carbide steel teeth and easy-to-use controls help you to quickly grind stumps into wood chips. Standard-flow and high-flow models available to handle stumps up to 45 in. in diameter and up to 12 in. below ground.