Asphalt Contractor provides HMA material producers, highway contractors and public works officials with critical "how-to" information on the process of HMA production, paving, and preservation. It also delivers the latest information and updates on equipment for the on-road paving industry. Asphalt Contractor is the only magazine that is dedicated to asphalt producers and contractors.
The RM-300 is capable of both full depth reclamation and soil stabilization.
Cat C11 engine with ACERT Technology
Optional attachments, such as a sliding operator's station, pressurized cab, automatic depth control, four mode steering, rear...
Cardinal's EPR+ Plus Truck Scale is available in impervious hydraulic or electronic load cell types.
DB 75,000-lb. stainless steel load cells are standard
Wide selection of EPR+ Plus capacities, platform sizes and types are available
Offered in both stationary and portable designs, cold feed bins from Asphalt Drum Mixers Inc. (ADM) are engineered and constructed to withstand abrasive aggregates and other jobsite abuse.
ADM cold feed bins are equipped with tapered sidewalls...
The WM 1000 is a mobile slurry mixer for dust-free addition of lime or cement for the cold road recycling process.
Production of slurry is controlled automatically by a microprocessor system; then the water-additive slurry is pumped or injected...
The PavementSaver II by Rayner Equipment Systems is designed for squeegee or spray application.
300 to 500 gal.
42 hp, diesel powered engine
Three-wheel drive, full hydrostatic brakes
Fail-safe emergency braking system
The PF6170 highway-class paver has a level-load suspension design that uses the two drive wheels and the center of the bogie hydraulic system to provide even ground contact for stability.
Standard two-wheel front-wheel assist or optional...
TransTech's PTS 3000 Pavement Temperature Sentry gives consistent and accurate asphalt mat temperatures on-the-run.
Eliminates the need for portable gun and associated labor
Fits any new or used roller
Easy to install and monitor
Hauck's EcoStar II & FGR is designed to reduce emissions for oil-fired burners.
Reduce NOx emissions by up to 50%.
Completely automated system that functions throughout the firing range of the burner
Can be retrofitted to existing...
System features precise control of RAP
Unique weighing system allows for higher RAP percentages in mix
Positive control of stem release
Steep sloped bin walls on rap bins for trouble free operation
PLC touch screen controls
Trackless Tack is an advanced asphalt emulsion tack specially formulated to dry extremely fast into a hard and driveable coating–often in less than 10 minutes. Recent national studies indicate that Trackless Tack, when compared to traditional tack...
The Poly Bolt-On TUFPADS HIGHTOP track pads are now available in 10-, 12-, 14- and 16-inch versions for different brands and models of asphalt milling machines. Designed to last 25% to 50% longer than the standard poly bolt-on track pads Bolt onto a...
SAKAI takes the next step into the road building product market with the introduction of the ER552F high-speed pneumatic tire road planer and PM550 road stabilizer.
The ER552F is a high-speed pneumatic tire road planer equipped with a motor...
The RD 12-90, RD 12A-90 and RD 16-90 feature a redesigned frame and operator's platform and a pressurized water system.
Features dual drum drive, articulated steering and hydrostatic drive with infinitely variable forward and reverse operation...
The SW990 double-drum, high-frequency vibratory asphalt roller offers a drum width of 84 in. and 4,000 vpm to allow for 10 to 12 impacts per foot at 4.55 mph.
166-hp Deutz TCD2012L06-2V watercooled, turbocharged diesel engine
Dual-drum drive system...
The new generation Roadtec E-series Shuttle Buggy material transfer vehicle has enhanced conveyor wear resistance, which will lower contractors’ operating costs.
Adjustable width front hopper
Dual operator stations have been enhanced and can...
The Vibratory Beveled Notch Edger is available in 12 or 18 in. with a flat, bolt-on design.
Can also be used as a full-depth safety edge bevel, berm compactor and for compacted Michigan safety joints
Works on the left or right side of the screed
Blackmer's NP Series sliding vane pumps have been designed to provide efficient transfer when handling asphalt or bitumen.
For all of different transfers of raw products from storage into refinery, and from process to process within asphalt operations...
The 10-ft. RP-190e rubber-tired and RP-195e track highway class pavers have received a major redesign, including the addition of CAT C7.1 Tier 4 Interim engines rated at 225 hp at 1,800 rpm. Beefed up conveyor chains are of the heavy-duty offset type...