Asphalt Contractor provides HMA material producers, highway contractors and public works officials with critical "how-to" information on the process of HMA production, paving, and preservation. It also delivers the latest information and updates on equipment for the on-road paving industry. Asphalt Contractor is the only magazine that is dedicated to asphalt producers and contractors.
The Safety Edge System offers a narrower screed in order to accomplish the 30° standard wedge.
Gives power to the slope function that creates the angle of the safety edge
Plugs into the on-board generator
Offered in standard or vibratory...
The MiniPOD Fuel wireless system provides electronic tracking technology for fuel distributed by portable storage tanks and transfer tanks.
Collects fuel use information using proprietary Drive-By Capture Technology
Identifies machine being fueled...
The D03CJ, D04CJ and D04EG small diesel engines provide Tier 4-compliant solutions in the 25- to 99-hp output range.
Three-cylinder D03CJ (1.655L) produces a maximum output of 55 hp and a maximum torque of 165 Nm at 1,800 rpm
The F1000T (tracked) and F1000W (wheeled) 10-ft.-wide asphalt pavers feature a high-performance outboard auger drive and high-capacity slat conveyor system designed to eliminate center-line segregation. High-capacity 3/4-in. formed hopper wings...
The Easy Screed III adapts to highway-class pavers.
Advanced-design heating elements in direct contact with upper surface of main screed plate
Even, controllable heat
Front taper design for uniform distribution
Adjustable slide track supports...
Vögele's Niveltronic Plus is a fully integrated system which provides the perfect match of the paver's technology to its grade and slope control system.
All settings are made on the screed console
Allows the screed operator to understand and...
TransTech's PTS 3000 Pavement Temperature Sentry gives consistent and accurate asphalt mat temperatures on-the-run.
Eliminates the need for portable gun and associated labor
Fits any new or used roller
Easy to install and monitor
The Terex PR950B half/full lane milling machine features a new, quieter C27 Tier II diesel engine and enhanced cooling system.
Makes up to 15-inch-deep plunge cuts with standard 86-inch half-lane cutter
Unobstructed access to the...
The WM 1000 is a mobile slurry mixer for dust-free addition of lime or cement for the cold road recycling process.
Production of slurry is controlled automatically by a microprocessor system; then the water-additive slurry is pumped or injected...