Asphalt Contractor provides HMA material producers, highway contractors and public works officials with critical "how-to" information on the process of HMA production, paving, and preservation. It also delivers the latest information and updates on equipment for the on-road paving industry. Asphalt Contractor is the only magazine that is dedicated to asphalt producers and contractors.
The ACCU-SLOPE is designed to rapidly and accurately measure and check cross-slope readings during the paving process.
Fully automated with single-person operation
Lightweight, portable and cost effective
Eliminates the need for multi-person...
MOBA PAVE-IR scan system provides a non-destructive method for detecting thermal segregation in asphalt pavement in real time.
Intelligent temperature scanner measures asphalt temperature over the entire paving width of up to 8 meters
The Vibratory Beveled Notch Edger is available in 12 or 18 in. with a flat, bolt-on design.
Can also be used as a full-depth safety edge bevel, berm compactor and for compacted Michigan safety joints
Works on the left or right side of the screed
The H20i features a 215-hp Deutz six-cylinder diesel engine that satisfies the stringent Tier 4i/EU IIIB/MLIT Step 4i requirements.
Hammtronic electronic machine management system
Available with smooth drum, padfoot segments or padfoot drum...
Atlas Copco launched the next generation series of F1000 pavers from Dynapac to the North American market designed to meet the interim Tier 4 emission regulations.
Available in both track and wheeled options
220- or 230-hp Cummins QSB 6.7 liter...
A new screed for the Vögele Vision Series of pavers, the front-mount VF 600, is equipped with vibration across the full paving width, up to 25 feet 6 inches.
Basic width is 10 feet; can be extended hydraulically up to 19 feet 6 inches; with...
The PCS900 automatic 3D screed control system can improve paving productivity and the rideability of road and airport surfaces by directly referencing the road design.
Can be configured with a combination of sonic tracers, slope sensors, averaging...
The LeeBoy 8816B track-mounted asphalt paver is designed for road and commercial applications.
8- to 15.5-ft. paving width
Vibrating, heated Legend screed system
130-hp Cummins Tier 3 diesel engine
Sonic auger and conveyor controls
Caterpillar's RM-500 provides high productivity in both asphalt reclamation and soil stabilization applications where the mixing depth does not exceed 20 inches. Three rotor options Can be configured for different applications and depth specifications
The MT2000 is a four-track, front-load, half-lane milling machine, while the MW500 is a four-wheel, rear-loading, utility-class model.
MT2000 features a 600-hp Cummins Tier III engine and three distinct engine and drum cutting speeds, and can run...
The BM1300/30-2 cold planer milling machine features a centrally mounted cutting drum that allows precise milling next to walls, curbs and other obstructions.
51-in. standard cutting width and milling depths up to 12.6 in.
The RT-500 recycling trailer integrates tanker trucks, a cold planer, crushing and screening units, mixers, pavers and rollers into one comprehensive operation.
950-hp RX-900 cold planer provides sole source of propulsion, reducing overall fuel...
The VSS Minimac self propelled slurry/microsurfacing machine is designed for paving applications in confined locations.
Double shaft Pugmill produces up to 1 ton per minute
Turning radius of 4.87 meters
Automatic materials sequencing
The new W 220 cold milling machine from Wirtgen America Inc. provides the milling width and depth of the heavier W 250 but with a lower weight that enables it to more easily meet legal weight load limits.
Can mill up to 14 inches deep, at a nominal...
TheAtlas Copco Dynapac PL2000S hydraulically powered, high-capacity cold planer features four-track steering, a front loading system and a mechanical belt-driven cutting drum.
For removing both asphalt and concrete pavements
Working width of 79 in...
CEI Asphalt-Rubber Systems are technologically advanced, easy to use, and meet demanding mix and emissions specs. Worldwide parts and service support; CEI will also service, repair or rebuild other brands of AR systems