Concrete Contractor cuts through the mass of information and delivers only the best, most practical and newsworthy material to the concrete contractor. In each issue, readers benefit from information on concrete equipment, current technology, job-site solutions, tips on staying competitive, finance, insurance and a host of other hard-hitting material.
The lithium-based Pentra-Hard Densifier is used to harden and dustproof new and existing concrete for industrial floors and concrete polishing procedures.
Water-based solution penetrates into the concrete and reacts with free calcium to form insoluble...
The Grip-Rite PROLOK High Chairs feature a locking head that raises rebar or reinforcing wire mesh to the proper position and secures rebar intersections with no tie wire or bar ties.
Stackable for multi-layer grids
Engineered to fi No. 3 through...
Thermomass building insulation system is used in concrete cast-in-place, tilt-up and precast walls to create energy-efficient concrete sandwich walls.
Results in load-bearing, durable and moisture-resistant walls
Insulation system uses Dow Styrofoam...
The Benders and Cutters rotate 360° for cast-in-place rebar fabrication.
Powered by 10,000 psi hydraulic pumps
Designed for one-hand operation
Bend or straighten rebar up to 135°
Bending and cutting capacities for #6 or #8 60-grade rebar
King-Hughes introduces the 515DG50 hog ring and ringer tool designed for the installation of steel mesh. Rings are galvanized to eliminate premature rusting Made of high strength 15-gauge wire Lightweight tool allows easy operation Eliminates...
The model FR-800-C combines a rotary bender with a heavy-duty shear to cut and bend up to and including #8 (1-in. diameter) rebar.
Fabricate stirrups, hooks and 3-D bends and cut bars to length
Plugs into a standard 110-volt outlet
Can be used...
The Silver Fox Series from Fox Blocks is an industrial strength reversible ICF that offers a 20% increase in R-value with no increase in wall thickness.
Blocks have six injection molded plastic ties made from polypropylene regrind...
The Cutting Edge Saw from Benner-Nawman cuts rebar, all-thread rod, coil rod, EMT conduit, pipe and more.
Cuts material flush with the surface, while a flush-cutting blade guard reduces blade exposure
Three-position, removable side handle and a...
The H20 Circular Formwork system is designed for smooth, circular walls and radii of any size greater than 12 ft.
All elements brought fully assembled to the site and are immediately ready for use
Four panel heights and two panel widths
Sonotube Commercial Forms outside ply can hold up to more than 72 hours of rainfall.
Alternative to steel and fiberglass forms
Can withstand full liquid head pressures of up to 20 ft.
Designed for buildings, parking garages, stadiums and...
The roller-compacted concrete (RCC) paver combines the power, capacity and mobility of the GOMACO RTP-500 rubber-tracked placer with the RCC screed.
Designed for harsh, zero-slump mixes
Receiving hopper has a working capacity of 4.75 cu. yds...
The BP50a backpack concrete vibrator now has CE Mark approval certifying it has met EU consumer safety requirements. The vibrator features a totally enclosed rotary throttle that prevents wet concrete from entering and clogging the throttle...
The SC-75 rubber track concrete buggy travels through wet, muddy ground conditions, operates in rough, uneven terrain and maneuvers within loose sand and gravel.
Features a 16-cu.-ft. capacity
90° dump angle
22-hp Robin gas engine...