Equipment Today provides the commercial construction industry with information for equipment selection, application, maintenance, and asset management, as well as safety and regulation. It serves contractors in highway and heavy general building demolition, utility, and other construction segments.
The post-less Quicksheet Guideframe System for cross-trench utilities installs quickly and easily with normal excavation equipment. The guideframe is assembled on the ground, and does not need to be set in a pilot trench. Two-, three- or four-sided...
Suited for construction stakeout and basic surveying
Angular measurements of 2 in. at distances up to 1.24 miles
14-hour Li-on battery life
Full alpha-numeric keypad
Onboard memory that will hold up to 24,000 points
IP54 environmental rating
Vishay Precision Group expands its offering of on-board overload protection systems to include the Axle transducer scale system, Trojan suspension-mounted scale system, and the Airscale system for vehicles with air suspensions.
The dump truck on-board weighing system can be retrofitted by replacing the truck’s rear hinge assembly and pin under the hoist cylinder with Vulcan's, which are equipped with shear pin load cells to measure weight at hinges and hoist.
Loadlog onboard scales increase the speed of truck turn-around, allowing for more loads per shift, while avoiding overload and multiple trips to the scale house.
Loadlog i range for large wheel loaders allows truck loading on the go with no stopping...
The 190-hp 755K crawler loader features a John Deere Interim Tier 4-certified diesel engine, resulting in the ability to get more work done with less noise and fewer emissions.
Uses the same powertrain and track system technology designed for the...
The Severe Duty Dozer Blade incorporates the structural strength needed for dozing applications with the curvature required for severe snow plowing.
Multiple box reinforced 48-in.-tall steel moldboard with a full-length 12-in. by 35-lb.-ft. S&C...
The ROBUSTUS rotating bushing track system increases the life of all components and reduces ownership and operating costs.
No need to turn bushings and pins and replace sprocket segments during the life of the undercarriage
Wider track link rail...
The 39.5-lb. VESSEL GT-5000HD hammer drill is powered by a rugged two-stroke, forced air-cooled gasoline engine that provides high torque output, as well as portability.
Accommodates up to a 1.97-in.-diameter SDS-max shank hammer drill
The Wobble Auger produces a hole with no loose dirt in the bottom or around the top, meaning no labor is required to remove material.
Hole is compacted and ready for concrete
Pushes through dirt, sand, clay, asphalt and compacted or embedded...
The 140-lb. Curb Roller uses the vibrations inherent in its operation to ensure that sufficient "fat" is worked into the concrete to eliminate voids.
Designed for use in small areas where a tight radius is required
Forms a 6-in. curb with a gutter...
Aftermarket Skid Steer enclosures add comfort and value to your machines with all-weather protection.
Include safety glass in the door, electric wipers and choice of hard or soft sides
Available for many different makes, both new and old
The EZ Grout Hog Crusher Job Site Material Recycler easily attaches to any skid-steer loader or forklift to become an on-the-spot recycling center at your jobsite. It can recycle most materials — brick, block, stone, rock, asphalt, non-reinforced...
The HS-57 reduces the hours required to repair manhole covers to minutes.
Heavy-duty hydraulic motor with hydraulic-powered breakout
60 carbide-tipped pics cut through concrete, asphalt and brick
Lifts casing and surrounding layers of...