ForConstructionPros.com

Terex/CMI PR600 Cold Planers
With a 600-hp diesel engine and operating weights approaching 91,200 pounds, the three- and four-track Terex/CMI PR600 cold planers from Terex Roadbuilding are designed for high-production milling and rehabilitation of asphalt surfaces.

• Center-mounted cutter design
• 10-degree tapered front and rear moldboard design
• 48-inch-diameter cutter with 177 tungsten carbide teeth
• 86-inch cutting width
• Four working speed ranges
• Proportional joystick steering with four steering modes
• Pleated 42-inch-wide high-capacity upper and lower conveyors

Process Heating Patch King
The Patch King asphalt patchers heat mix to a precise temperature during the night.

• Rotary auger model PK-40HSD features reversible rotary conveyor that is driven by a hydraulic motor and supported by heavy-duty ball bearings
• Mix/anti-bridging device features separate hydraulic drive and controls
• Wear parts, including auger and trough, are easily replaceable
• Reversible auger feeds patch mix to work area to eliminate dump beds and hoists

VSS Macropaver 12B
The VSS Macropaver 12B truck-mounted slurry/microsurfacing machine offers an average output of 3 to 4 tons/minute.

• 12-cubic-yard maximum aggregate capacity
• Hydraulic fail-safe automatic materials sequencing
• Seal Lock hydraulics
• Fines feeder power and drive system offers increased power and a simpler, robust design
• Tier II electronically-controlled engine
• 850-gallon water and emulsion tanks
• Options include CALTRANS material monitoring and control system; truck speed control on operator platform; stainless-steel additive tank/pump system; high-pressure washer/reel; and more

BOMAG Cold Planer Milling Machines