ForConstructionPros.com

Roadtec SX-7 Soil Stabilizer
Powered by a 700-hp Caterpillar engine, the SX-7 is capable of producing up to a 21-inch cut depth and 102-inch width.

• Four cutting speeds with torque to the cutter drum rated at over 500,000 pound-force inches in first gear.
• Right-hand flush cut pulverizes or stabilizes materials ranging from soil to old pavement all the way to the curb line
• Four-wheel steer allows for a 155-inch turning radius in the cut or zero inches out of the cut.
• Control console and operator seat swivel 180 degrees

Wirtgen WR 2400 Stabilizer
The all-wheel-drive WR 2400 soil stabilizer and reclaimer provides a 94.5-inch working width and is capable of milling and recycling to a depth of up to 20 inches.

• Microprocessor-controlled injection systems for water, emulsion, cement slurry or foamed asphalt
• Milling drum features quick-change HT11 toolholder system
• 563-hp Tier III diesel engine
• All-wheel steering with four steering modes

Caterpillar PM-200
Caterpillar's PM-200 features a 575-hp Cat

C18 engine with ACERT technology.

• 79-inch rotor width
• 12.5-inch rotor depth
• 68,122-pound operating weight
• Load Sensing Propel System
• Computerized monitoring system in operator's station

Bomag Recycler/Stabilizers
The rear-wheel-drive MPH362-2 and four-wheel-drive MPH364-2 recycler/stabilizers now offer an electronically controlled, 360-hp Cummins QSM11 six-cylinder, water-cooled Tier III diesel engine.

• Double-reduction planetary rear drive system propelled by a pair of axial piston, variable-displacement motors
• Automatic Power Adjustment System
• Both models available in three rotor configurations with cutting depths from 12 to 21 inches
• Rotor measures 79 inches wide and offers speeds of 135 and 150 rpm

Terex/CMI PR600 Cold Planers
With a 600-hp diesel engine and operating weights approaching 91,200 pounds, the three- and four-track Terex/CMI PR600 cold planers from Terex Roadbuilding are designed for high-production milling and rehabilitation of asphalt surfaces.

• Center-mounted cutter design
• 10-degree tapered front and rear moldboard design
• 48-inch-diameter cutter with 177 tungsten

carbide teeth

• 86-inch cutting width
• Four working speed ranges
• Proportional joystick steering with four steering modes
• Pleated 42-inch-wide high-capacity upper and lower conveyors

VSS Macropaver 12B