ForConstructionPros.com

Volvo Wheeled Pavers
The PF-6160 and PF-6170 wheel-mounted pavers feature an auger system that is now independent of the conveyor system.

• Each of the two auger and conveyor drives uses sonic sensors for more precise handling of material
• Reversible augers and conveyors are optional
• Hopper capacity of 14.4 tons gives each paver a practical production rate of 820 tons per hour
• 205-hp Cummins Tier III engine
• Paving speed of 293 fpm and a traveling speed of 12 mph
• Operator station features a new layout and a digital display, which provides the operator with onboard diagnostic capabilities
• Dual control stations that can rotate and pivot at two points for comfort and each seat may be extended beyond the edge of the machine for improved visibility
• Screed width of 10 feet and a maximum paving width of 26 feet

Vögele Super 700 Paver
The Super 700 with electrically-heated AB 200 V screed is able to drive through an opening less than 4 feet wide, pave within 2 inches of boundaries and drive in a 43-inch footprint.

• 57-hp Deutz BF3 M 2011 liquid-cooled diesel engine
• ECO Mode ensures sufficient power for all functions, but at a lower rpm for less fuel consumption, noise and wear
• 5.5-ton hydraulically operated hopper
• Basic paving width ranges from 3.6 to 6.5 feet with paving depths to 6 inches

Leeboy 8510 Conveyor Paver
The 8510 incorporates 12-inch-diameter casted augers and a 7.5-ton hopper with large radius wings for enhanced material flow.

• Vibrating, heated Legend Screed System
• Two-speed hydrostatic drive allows up to 6-inch paving depths at infinitely variable widths from 8 to 15 feet and speeds up to 150 fpm
• Standard hydraulic operating controls and dual lever joystick steering from both sides
• 74-hp Hatz Silent Pack engine

HAMM HD O120V Asphalt Compactor
The HD O120V has a 78-inch drum width with an offset working width of 81.5 inches.

• 26,345-pound operating weight
• 3.9-mph working speed
• Rear drum features oscillation compaction with oscillation force of 46,125 to 62,775 pounds
• Front drum features conventional vibration up to 3,000 vpm

Sakai ExactCompact
The onboard ExactCompact system makes it easy for compactor operators to maintain asphalt roller impact spacing on the run.

• Simple push button control enables operator to preset desired target figure anywhere between eight and 20 impacts per foot
• Series of lights indicates when correct operating speed is achieved
• Standard on Sakai SW850 and SW900 double-drum asphalt rollers, and may be retrofit on other vibratory rollers regardless of brand