ForConstructionPros.com

Wirtgen WR 2400 Stabilizer
The all-wheel-drive WR 2400 soil stabilizer and reclaimer provides a 94.5-inch working width and is capable of milling and recycling to a depth of up to 20 inches.

• Microprocessor-controlled injection systems for water, emulsion, cement slurry or foamed asphalt
• Milling drum features quick-change HT11 toolholder system
• 563-hp Tier III diesel engine
• Four-fold, full-floating lifting column system
• All-wheel steering with four steering modes

Bomag Recycler/Stabilizers
The rear-wheel-drive MPH362-2 and four-wheel-drive MPH364-2 recycler/stabilizers now offer an electronically controlled, 360-hp Cummins QSM11 six-cylinder, water-cooled Tier III diesel engine.

• Double-reduction planetary rear drive system propelled by a pair of axial piston, variable-displacement motors
• Automatic Power Adjustment System
• Both models available in three rotor configurations with cutting depths from 12 to 21 inches
• Rotor measures 79 inches wide and offers speeds of 135 and 150 rpm

Process Heating Patch King
The Patch King asphalt patchers heat mix to a precise temperature during the night.

• Rotary auger model PK-40HSD features reversible rotary conveyor that is driven by a hydraulic motor and supported by heavy-duty ball bearings
• Mix/anti-bridging device features separate hydraulic drive and controls
• Wear parts, including auger and trough, are easily replaceable
• Reversible auger feeds patch mix to work area to eliminate dump beds and hoists

Volvo MW-500
The MW-500 rear-loading, utility-class milling machine features a 30-inch-diameter drum with a maximum cutting depth of 8.25 inches and standard cutting width of 20 inches.

• 125-hp Deutz diesel engine
• Four-wheel drive allows for a 7-inch cutting radius and includes standard Anti-slip Control
• Hydraulically raised drum side skirts and rear moldboard
• Fully enclosed, conveyor adjustable up and down and up to 25 degrees side to side in either direction

Caterpillar RM-300 Rotary Mixer
The RM-300 is capable of both full depth reclamation and soil stabilization.

• Cat C11 engine with ACERT Technology
• Optional attachments, such as a sliding operator's station, pressurized cab, automatic depth control, four mode steering, rear wheel-assist and two redesigned rotors with increased cutting depth capacity that provide better gradation and versatility
• Rear wheel-assist allows the rear wheels to be driven by a separate hydraulic pump to provide increased tractive effort